Specna Arms RRA SA-E10 PDW EDGE™ HAL² ™airsoft rifle
EDGE™ is a line from Specna Arms that combines a range of solutions and technologies that are difficult to find in other replicas on the market. Straight out of the box you get a replica in which you don't have to make any modifications, but if you want to - they will be fabulously easy.
The replica has been equipped with Specna Arms' advanced HAL² ™ electronic control system, a Polish system in which the magnetic Hall effect-based trigger provides unprecedented sensitivity (up to 500 points), responsive operation, while being insensitive to dirt and external light. TheHAL² ™ Widgetworks with all standard triggers, so you can choose from numerous models on the market and personalise your replica even further. The built-in Bluetooth® Low Energymodule allows an easy and stable connection to your phone, and at the same time ensures a long battery life for the replica. Simply switch it on and it is immediately possible to configure the settings. On the other hand, an array of sensors watches over the replica's trouble-free operation and will prevent damage to the replica - should a problem be detected.
With the free Specna Link™ Google Play or Specna Link™ App Store app, you will discover all the possibilities of the HAL² ™ chip. This intuitive and glove-friendly tool will allow you to quickly adapt the parameters of your replica to the requirements of your shooter. You can create several profiles for one replica - with different settings or create accounts for several different replicas. Then all you have to do is select the option in the app and you're ready to play!
- trigger sensitivity adjustment,
- precocking for faster trigger press response,
- selectable shooting modes: SINGLE, BINARY, SERIAL or AUTO and assign it to the selected selector position,
- adjustment of the burst length,
- setting of the rate of fire,
- protection of LiPo/LiIon batteries against over-discharge,
- magazine mode,
- continuously displayed battery charge level,
- saving settings for various game modes,
- advanced telemetry data, which can be collected in one place and performance can be monitored with it,
- possibility to follow the status of the replica in real time.
The replica comes with full,licensed markings from firearms manufacturer Rock River Arms. This is an American manufacturer of gun parts and accessories, but primarily of high quality AR-15 family carbines. Founded in 1996 by the Larson brothers, the company, in partnership with Les Baer, is based in Colonie, Illinois. Today, RRA supplies its carbines under contract to, among others, the DEA, FBI or US Marshals.
Every part of the replica has been manufactured and fitted with attention to detail, additionally a Nano Coating has been used to finish the barrel to prevent scratches. The barrel featuresdeeply engraved Rock River Arms markings andan individual serial number confirmed by an additionalhologram. Noteworthy details include a QD pistol grip, providing quick and easy access to the motor without the need for tools, and a double -sidedeyelet for mounting a tactical sling.
The SA-E10 PDW airsoft rifle is equipped with a short front sight in22mm RIS standard, allowing the installation of various accessories - grips, torches, laser pointers or optical sights. The replica's barrel is finished with an exhaust device mounted on a14mm CCW thread. On the dorsal RIS rail,folding sighting instruments are placed.
The replica has a stock-mountedprecision 6.03mminner barrel, which will ensure high accuracy and repeatability of shots fired.A rotating Hop-Up chamber of a new type cooperates with the barrel, which allows for a very precise and stable adjustment of the ball cocking system.
The replica uses a quick-change spring system, ESA™. It allows quick and efficient adjustment of the replica's power to the conditions expected on the field of play without the need to have access to a workshop or a number of special tools - simply unscrew the butt guide to reveal access to exchange the spring without having to remove or disassemble the gearbox.
The advantages of theESA™systemare difficult to overstate. In view of the arrangements within the environments themselves, this system guarantees the user considerable possibilities and a great deal of freedom. TheESA™systemmakes it possible , with a minimum of time, to change themainspring and thus adjust the replica's discharge velocity to the area of play so as to guarantee an ideal compromise between the effectiveness of firearms and the safety of oneself and other players.A second M90 mainspring is also included in the box with the replica, which is perfect for indoor games.
At the heart of the replica isan ORION Gearbox based on a reinforced frame and equipped with a mainspring release function. Straight out of the box, the replica has a number of high-quality parts, so it has a high operating culture and is ready for further tuning. The ORION Gearbox is ready for use withM140 springs, with components such as:
- reinforced polymer piston with full steel jaw
- aluminium, sealed nozzle
- aluminium, double-sealed cylinder head
- aluminium, double-sealed piston head with bearing
- bearing spring guide
- set of steel gears
- 8mm ball bearings
Included in the box with the replica aretwo S-MAG mid-cap magazines with a capacity of 125 rounds each. The S-MAG is an exclusive polymer magazine designed by Specna Arms. What draws attention is the distinctive texture composed of Specna Arms logos. The S-mag ensures trouble-free ball feeding, even at high ROF.
The PDW versionis equipped with a telescopic stock made entirely of metal - apart from the foot made of polymer with an anti-slip texture. The battery compartment is located inside the dummy buffer tube.A LiPo battery with maximum dimensions of 12x17x75mm will fit into the dummy buffer tube.
Dedicated7.4V and 11.1V LiPo batteries forSpecna Arms EDGE PDW replicas are available:
Package include:
- 2 x mid-cap S-MAG magazine
- Instruction
- Replica
- M90 additional spring
- Vertical Grip
Package exclude:
- The set does not include the battery nor charger
HAL2 does not support brushless DC motors (BLDC)
Battery included NiCd
rechargeable battery is characterized by high efficiency
current-carrying capacity, but there are disruptive effect on memory.
Should be unloaded and loaded in the full cycle, ie, it is recommended
to fully discharge, and after unloading must charge the battery
immediately without leaving it for a long time in a discharged state. | No |
| Bearings diameter [mm] | 8 |
| Blow Back Blow back is a simulation system of the cocking lever - it imitates the work of it as the equivalent sharp. This system raises the realism and adds a lot more experience during shooting. | No |
| Colour | Half-Tan |
| Product length [cm] | 59.50 |
| Product weight [g] | 0 |
| Power supply | Electric |
| Material | Metal Plastic |
| Muzzle velocity [FPS] It is the spped of bb, while its leaving the innerbarrel of replica. This speed is measured in FPS (Feet Per Second). 1 FPS = 0,3 m/s 1 J = 99 m/s 1 J = 326,7 FPS | 320 |
| Fire mode | Full-auto Semi-auto |