Specna Arms SA-C22 CORE™ HAL ETU™ 0.5Jairsoft Carbine
Specna Arms to meet the expectations of customers presents the CORE™line - a unique series of replicas that introduces a new quality on the market.Attractive pricecombined withhigh quality materialsmakes this series for both beginners and seasoned airsoft players. Included with the built-in HAL™ chip , the trigger control system supports the replica's performance and allows programming of functions easily using the trigger and selector.
HAL™ chip features:
-trigger detection based on magnetic sensors and Hall effect
-active brake
-binary trigger
-adjustable trigger sensitivity (5 levels from 20 to 100%)
-adjustable pre-cocking (6 levels)
-aUTO programmable fire modes (full auto, semi, 3-rd burst, 5-rd burst)
-sEMI programmable fire modes (semi, binary, AUG, sniper)
-easy programming via trigger
-low battery alarm
-compatible with brushless motors
**The AUTO function fires a 3 round burst first then fires Full Auto.
The body, the slide, includingthe enlarged SF-type stock that accommodates the battery,and the pistol grip are made of nylon fibre-reinforced polymer. Other parts, such as the barrel, RIS front, flame suppressor, enlarged reloading handle and tactical sling assembly are made of metal(all screws, pins, shell ejection window and dummy lock are made of steel). The body is marked with the serial number.
The replica isvery well-fitted, the user will not experience any play between the lower and upper parts of the body. The use of lightweight polymer body allowed to reduce the weight, which makes it perfect for dynamic games or prolonged milslims. What's more, the fibreglass reinforcement also makes the body stronger than polymer and metal bodies.
The replica has been fully adapted to work with LiPo and LiFe type batteries. The power of the replica has been adjusted to the German market <230 fps. For this reason, spring replacement is only possible by opening the gearbox.
The gearbox conceals8-mm slide bearings and the steel gears mounted on them . The system is secured by four anti-reverse pawls. The lightweight polycarbonate piston is fittedwith a full steel bar for added strength. A precisionRotary Hop-Up chamber is used here, and the precisely manufacturedRotary Hop-Up chamberworks perfectly with the high quality6.03mm precision barrel. The use of a precision barrel has a positive effect on the range and accuracy of the replica. It is important to remember to use high quality 6mm ammunition.
The replica is equipped with a front M-LOK rail and an adjustable buttstock. A folding sight has been fitted on the upper RIS rail, which does not interfere with optoelectronic aiming devices. Thanks to the extendable buttstock finished with an anti-slip textured foot, it is possible to adjust the length of the replica to the build and the shooter's preferences. The standard flame suppressor is mounted on a 14-mm left-hand thread, which makes it possible to attach a sound suppressor in its place.
Package include:
- Cleaning rod
- Hi-Cap Magazine
- Replica
- Allen key
- Small Tamyia - Deans adapter
Package exclude:
- The set does not include the battery nor charger
NOTE!!!
When starting the replica for the first time, immediately after connecting the batteries, hold the trigger in SAFE mode for about 5 seconds to activate the HAL™ module
Battery included NiCd
rechargeable battery is characterized by high efficiency
current-carrying capacity, but there are disruptive effect on memory.
Should be unloaded and loaded in the full cycle, ie, it is recommended
to fully discharge, and after unloading must charge the battery
immediately without leaving it for a long time in a discharged state. | No |
| Blow Back Blow back is a simulation system of the cocking lever - it imitates the work of it as the equivalent sharp. This system raises the realism and adds a lot more experience during shooting. | No |
| Colour | Black |
| Product length [cm] | 89 |
| Product weight [g] | 2510 |
| Power supply | Electric |
| Dystrybutor Odpowiedzialny w UE | GF CORP Sp. Z o.o. Sp.k. ul. Jana Długosza 42-46 51-162 Wrocław Polska info@gfcorp.pl |
| Muzzle velocity [FPS] It is the spped of bb, while its leaving the innerbarrel of replica. This speed is measured in FPS (Feet Per Second). 1 FPS = 0,3 m/s 1 J = 99 m/s 1 J = 326,7 FPS | 230 |
| Fire mode | Full-auto Adjusted burst Semi-auto |
| Gearbox version Indications v2, v3, v6 does not mean the level of advance, but only shape of gearbox skeleton which was used and selected by the manufacturer depending on the capabilities of the body of the replica. For example, a models of the M4/M16 family, MP5, have a v2 gearbox, while the AK family have gearbox v3. | Gearbox v2 |