Specna Arms SA-F12 FLEX™ GATE X-ASR Gen.2 airsoft Carbine
The SpecnaArms Flex Gen.2 series of carbines was created to provide the best possibleperformance experience at an attractive price. Based on experience, passion, commitment, the series has been redesigned for even better performance that will allow the user to take a factory product out of the box that is up to any task on the airsoft field.
To this end, the Flex Gen.2series has been equipped with, among other things:
- TDC Magnus™ Rotary Hop-Up Chamber (Top Down Center) allowing for very accurate and stable adjustment (covered by European Patent number 015052069-0001)
- Helium™ Flat Hop Eraser, which will improve the stability of the ball's undercurve
- Aluminium sealed nozzle
- Æther™ Gearbox - reinforced frame (covered by European Patent number: 015044865-0001), equipped with:
- mainspring release function
- pre-cocking and AoE inspection windows
- reinforced front
- inspection windows for easy priming
- trigger adjustment function
- screw holes for frame alignment
- Readiness for use with M140 springs
The carbine is equipped with a factory-fitted MOSFET X-ASR from the Polish GATE brand. This is an unprecedented collaboration between a Polish manufacturer and a well-known airsoft gun factory. The highest quality MOSFET X-ASR will take care of the safety of the replica's components, improve the response to the trigger and the life of the electronics and battery, as well as allow the diagnosis of basic failures inside the replica thanks to the built-in indication LEDs.
Specna Arms presents a line of replicas - the FLEX™. The attractive price combined with an innovative spring replacement system and high quality materials make this series particularly attractive to beginner airsoft players.
Nylon fibre-reinforced polymer is used for the body, front, slide and battery compartment of the enlarged SF buttstock and pistol grip.
Aluminium and ZnAl alloy are used for the barrel, flame damper, enlarged reloading handle, dummy breech block and manipulators. All screws, pins, the ejection window, the QD sling assembly (on the butt) and the dummy slide are made of steel. All markings and the serial number have been applied to the barrel.
The replica is very well-fitted, and the user will not notice any play between the lower and upper parts of the body. The use of lightweight material for the body and front made it lighter, which makes it a perfect replica for dynamic CQB games. Furthermore, the nylon fibre reinforcement makes the construction more robust than other polymer constructions.
The replica uses the quick spring change system, ESA™. This allows the replica's power to be quickly and efficiently adapted to the conditions expected on the field of play without the need for access to a workshop or a range of specialised tools.
The replica has been fully adapted to work with LiPo and LiFe type batteries. Thanks to the base initial discharge speed of ~390 FPS guaranteed by the pre-installed mainspring, the replica is perfect for medium range operations. An M90-type spring is also included, which allows the initial velocity to be reduced to ~300 FPS, thus making the replica perfectly suited for short-range or indoor operations.
In addition to the mentioned internal parts ( TDC Magnus™ chamber, Æther™ gearbox shell, Helium™ flat rubber, sealed aluminium nozzle), inside the replica you will find, among others:
- 8mm plain bearings
- steel gears
- polycarbonate piston with full steel slats
- steel cut-off lever
- high quality 6.03mm precision barrel
Package include:
- S-Mag Hi-Cap Magazine
- Cleaning rod
- GATE X-ASR Diagnostics Card
- Replica
- Small Tamyia - Deans adapter
- M90 additional spring
- Vertical Grip
Package exclude:
- The set does not include the battery nor charger
Battery included NiCd
rechargeable battery is characterized by high efficiency
current-carrying capacity, but there are disruptive effect on memory.
Should be unloaded and loaded in the full cycle, ie, it is recommended
to fully discharge, and after unloading must charge the battery
immediately without leaving it for a long time in a discharged state. | No |
| Colour | Black |
| Product length [cm] | 89 |
| Product weight [g] | 2540 |
| Power supply | Electric |
| Dystrybutor Odpowiedzialny w UE | GF CORP Sp. Z o.o. Sp.k. ul. Jana Długosza 42-46 51-162 Wrocław Polska info@gfcorp.pl |
| Muzzle velocity [FPS] It is the spped of bb, while its leaving the innerbarrel of replica. This speed is measured in FPS (Feet Per Second). 1 FPS = 0,3 m/s 1 J = 99 m/s 1 J = 326,7 FPS | 390 |
| Fire mode | Full-auto Semi-auto |
| Gearbox version Indications v2, v3, v6 does not mean the level of advance, but only shape of gearbox skeleton which was used and selected by the manufacturer depending on the capabilities of the body of the replica. For example, a models of the M4/M16 family, MP5, have a v2 gearbox, while the AK family have gearbox v3. | Gearbox v2 |
| Hop-Up Hop-Up system is used for overclocking bb during the shot (putting it in rotation), through which, it extends its flight path. Acting laws of physics make that bb lift up, while the gravitational force take it down. Appropriate adjustment of Hop-Up, will compensate for these two factors, which result in long and straight flight for longer distance and be greater focus shot (to improve accuracy). | Yes |