Specna Arms SA-FH06 FLEX™HAL ETU Gen. 2 airsoft Carbine
The SpecnaArms Flex Gen.2 series of carbines has been developed to provide the best possible user experience at an attractive price. Based on experience, passion, commitment, the series has been redesigned to achieve even better performance that will allow the user to take a factory product out of the box that is up to any task on the airsoft field.
To this end, the Flex Gen.2series has been equipped with, among other things:
- TDC Magnus™ Rotary Hop-Up Chamber (Top Down Center) allowing for very accurate and stable adjustment (covered by European Patent number 015052069-0001)
- Helium™ Flat Hop Eraser, which will improve the stability of the ball's undercurve
- Aluminium sealed nozzle
- Æther™ Gearbox - reinforced frame (covered by European Patent number: 015044865-0001), equipped with:
- mainspring release function
- pre-cocking and AoE inspection windows
- reinforced front
- inspection windows for easy priming
- trigger adjustment function
- screw holes for frame alignment
- Ready for use with M140 springs
Features of the HAL™ system:
- trigger detection based on magnetic sensors and Hall effect
- active brake
- binary trigger
- adjustable trigger sensitivity (5 levels from 20 to 100%)
- adjustable pre-cocking (6 levels)
- AUTO programmable fire modes (full auto, semi, 3-rd burst, 5-rd burst)
- SEMI programmable fire modes (semi, binary, AUG, sniper)
- easy programming via trigger
- low battery alarm
- compatible with brushless motors
**The AUTO function fires a 3 round burst first then fires Full Auto.
The replica is made mainly of nylon fibre-reinforced polymer and metal parts. The polymer used is characterised by high strength, rough texture and matt colour.
The most critical parts are made of metal , i.e.: flame suppressor, external barrel, dummy slide, shell ejector flap, fire mode switch, breech release button, magazine clip, sling mount, pins, sights and reloading lever.
In addition to the aforementioned internal parts ( TDC Magnus™ chamber, Æther™ gearbox shell, Helium™ flat rubber, sealed aluminium nozzle), inside the replica you will find, among others:
- 8mm slide bearings
- steel gears
- polycarbonate polymer piston with full steel slats
- a high quality 6.03mm precision barrel
The replica uses a quick-change spring system, ESA™. This allows the power of the replica to be quickly and efficiently adapted to the conditions expected on the field of play without the need for access to a workshop or a range of specialist tools.
Features of the replica:
- lightweight and compact design.
- Functional bolt-catch.
- hAL™ layout.
- Extendable 6 position stock with rubber footplate.
- Ergonomic pistol grip.
- four RIS rail assembly on the handguard and dorsal rail on the body.
- eSA™ quick-change spring system
Package include:
- S-Mag Hi-Cap Magazine
- Cleaning rod
- Replica
- Allen key
- Small Tamyia - Deans adapter
- M90 additional spring
Package exclude:
- The set does not include the battery nor charger
NOTE!!!
When starting the replica for the first time, immediately after connecting the batteries, hold the trigger in SAFE mode for about 5 seconds to activate the HAL™ module
Battery included NiCd
rechargeable battery is characterized by high efficiency
current-carrying capacity, but there are disruptive effect on memory.
Should be unloaded and loaded in the full cycle, ie, it is recommended
to fully discharge, and after unloading must charge the battery
immediately without leaving it for a long time in a discharged state. | No |
| Blow Back Blow back is a simulation system of the cocking lever - it imitates the work of it as the equivalent sharp. This system raises the realism and adds a lot more experience during shooting. | No |
| Colour | Half-Tan |
| Product length [cm] | 78.50 |
| Product weight [g] | 2765 |
| Power supply | Electric |
| Dystrybutor Odpowiedzialny w UE | GF CORP Sp. Z o.o. Sp.k. ul. Jana Długosza 42-46 51-162 Wrocław Polska info@gfcorp.pl |
| Muzzle velocity [FPS] It is the spped of bb, while its leaving the innerbarrel of replica. This speed is measured in FPS (Feet Per Second). 1 FPS = 0,3 m/s 1 J = 99 m/s 1 J = 326,7 FPS | 400 |
| Fire mode | Full-auto Adjusted burst Semi-auto |
| Gearbox version Indications v2, v3, v6 does not mean the level of advance, but only shape of gearbox skeleton which was used and selected by the manufacturer depending on the capabilities of the body of the replica. For example, a models of the M4/M16 family, MP5, have a v2 gearbox, while the AK family have gearbox v3. | Gearbox v2 |