Specna Arms SA-J04 EDGE™ HAL™ ETU airsoft Carbine with Magnus TDC chamber
The presented model featuresa rotatingHop-Up Magnus TDC (Top Down Center)chamber, which will guarantee even better performance of the replica, and the HAL™ ETU system
Features of the HAL™ ETU Module:
- trigger detection based on magnetic sensors and Halleffect
- active brake
- binary trigger
- adjustable trigger sensitivity (5 levels from 20 to 100% )
- adjustable pre-cocking (6 levels )
- programmable AUTO fire modes (full auto, semi, 3-rd burst, 5-rd burst)
- programmable SEMI fire modes (semi, binary, AUG, sniper )
- easy programming using the trigger
- low battery alarm
EDGE™ is a line of Specna Arms replicas that combines a range of solutions and technologies that are difficult to find in other replicas on the market. It is a line that focuses both on very good external workmanship, solutions that increase the versatility of the replica, prolonging its life, facilitating the diagnosis of malfunctions, as well as susceptibility to power tuning.Straight out of the boxyou get a replica in which you do not have to make any modifications, but if you want - they will be fabulously easy.
The Specna Arms J-Series™ airsoft rifles are largely made of steel , with steel components including the barrel, breech cover, external barrel, trigger guard, magazine catch , selector wing, tactical sling eye on the butt, folding buttstock, dummy gas tube, and notch. aluminum was used to make, among other things, the sighting devices , the dovetail mount, the slide with reloading handle and the discharge device. the stock and pistol gripare made of polymer.
Inside we will findan ORION™ V3 Gearbox , which is characterisedby high stock operation culture . The mechanism is prepared for further tuning and ready to work with springs for the M140. the following components are fitted inside:
- Polymer piston with full steel jaw
- Double sealed aluminium cylinder head
- Aluminium sealed nozzle
- Polymer sealed piston head
- Polymer bearing spring guide
Features of the replica:
-HAL ETU system
- Rotary Hop-Up Magnus TDC (Top Down Center)chamber
- Sheet steel body
- Single-piece steel outer barrel
- Quick-change spring system ESA2
- side dovetail mounting rail
- plenty of room for a stick-type battery under the breech cover (LiPo ready)
- shellised, side-folding stock
Package include:
- 2 x mid-cap S-MAG magazine
- Cleaning rod
- Replica
- Allen key
- Small Tamyia - Deans adapter
- BBs speedloader
- M90 additional spring
Package exclude:
- The set does not include the battery nor charger
Battery included NiCd
rechargeable battery is characterized by high efficiency
current-carrying capacity, but there are disruptive effect on memory.
Should be unloaded and loaded in the full cycle, ie, it is recommended
to fully discharge, and after unloading must charge the battery
immediately without leaving it for a long time in a discharged state. | No |
| Blow Back Blow back is a simulation system of the cocking lever - it imitates the work of it as the equivalent sharp. This system raises the realism and adds a lot more experience during shooting. | No |
| Colour | Black |
| Product length [cm] | 95 |
| Product weight [g] | 3420 |
| Power supply | Electric |
| Dystrybutor Odpowiedzialny w UE | GF CORP Sp. Z o.o. Sp.k. ul. Jana Długosza 42-46 51-162 Wrocław Polska info@gfcorp.pl |
| Muzzle velocity [FPS] It is the spped of bb, while its leaving the innerbarrel of replica. This speed is measured in FPS (Feet Per Second). 1 FPS = 0,3 m/s 1 J = 99 m/s 1 J = 326,7 FPS | 380 |
| Fire mode | Full-auto Adjusted burst Semi-auto |
| Gearbox version Indications v2, v3, v6 does not mean the level of advance, but only shape of gearbox skeleton which was used and selected by the manufacturer depending on the capabilities of the body of the replica. For example, a models of the M4/M16 family, MP5, have a v2 gearbox, while the AK family have gearbox v3. | Gearbox v3 |