SpecnaArms SA-J81 CORE™ HAL ETU Gen. 2 airsoft Carbine.
The SpecnaArms J-Core Gen. 2 carbine series has been developed to deliver the best possible user experienceat an attractive price point. Based on experience, passion, commitment, theJ-Core Gen. 2 series has been redesigned for even better performance that will allow the user to take a factory product out of the box that is up to any task on the airsoft field.
Tothis end, theJ-Core Gen.2series has been equipped with, among other things:
- 6.03 mm brass barrel
- 16: 1 gears
- Full steel piston with 14.5 teeth
- Polymer sealed piston head
- Polymer sealed cylinder head
- Aluminum Cylinder
-Sealed aluminium nozzle
- RotaryHop-Up TDC Magnuschamber (Top Down Center )
- ETU HAL system
Features of the HAL™ ETU Module:
- trigger detection based on magnetic sensors and Halleffect
- active brake
- binary trigger
- adjustable trigger sensitivity (5 levels from 20 to 100% )
- adjustable pre-cocking (6 levels )
- programmable AUTO fire modes (full auto, semi, 3-rd burst, 5-rd burst)
- programmable SEMI fire modes (semi, binary, AUG, sniper )
- easy programming using the trigger
- low battery alarm
SpecnaArms to meet the expectations of customers presents the CORE™ gen.2 line. Attractive price combined with innovative spring replacement system and high quality materials makes this series for both beginners and experienced airsoft players .
SpecnaArmsJ-Series™ CORE™ Gen.2airsoft rifles the replicas are made mainly of durable nylon fibre-reinforced polymer, which makes the replica very light and comfortable. The most critical parts, such as the barrel holder, dummy slide, barrel base with the sights, handguard holder, barrel and musket are made of zinc and aluminium alloy. The lock chamber cover, safety wing and trigger guard aremade of steel.
Specna ArmsJ-Series™ CORE™ is characterised by very good fit, low weight and ergonomics .
Features of the replica:
- body made of polymer
-low weight
- very good fit
- side mounting rail of the "dovetail " type
- plenty of space for a stick-type battery under the lock chamber cover (LiPo ready )
- originaldesigned mid-cap S-MAG magazine
Most types of magazines produced by Cyma, JG, E&L, Bolt will fit the replica without any problems, fitting magazines of other brands may require minor modifications.
Package include:
- S-Mag Hi-Cap Magazine
- Cleaning rod
- Replica
- Small Tamyia - Deans adapter
- M90 additional spring
Package exclude:
- The set does not include the battery nor charger
NOTE!!!
When starting the replica for the first time, immediately after connecting the batteries, hold the trigger in SAFE mode for about 5 seconds to activate the HAL™ module
Battery included NiCd
rechargeable battery is characterized by high efficiency
current-carrying capacity, but there are disruptive effect on memory.
Should be unloaded and loaded in the full cycle, ie, it is recommended
to fully discharge, and after unloading must charge the battery
immediately without leaving it for a long time in a discharged state. | No |
| Bearings diameter [mm] | 8 |
| Blow Back Blow back is a simulation system of the cocking lever - it imitates the work of it as the equivalent sharp. This system raises the realism and adds a lot more experience during shooting. | No |
| Colour | Black |
| Product weight [g] | 2625 |
| Power supply | Electric |
| Dystrybutor Odpowiedzialny w UE | GF CORP Sp. Z o.o. Sp.k. ul. Jana Długosza 42-46 51-162 Wrocław Polska info@gfcorp.pl |
| Muzzle velocity [FPS] It is the spped of bb, while its leaving the innerbarrel of replica. This speed is measured in FPS (Feet Per Second). 1 FPS = 0,3 m/s 1 J = 99 m/s 1 J = 326,7 FPS | 380 |
| Fire mode | Full-auto Adjusted burst Semi-auto |
| Gearbox version Indications v2, v3, v6 does not mean the level of advance, but only shape of gearbox skeleton which was used and selected by the manufacturer depending on the capabilities of the body of the replica. For example, a models of the M4/M16 family, MP5, have a v2 gearbox, while the AK family have gearbox v3. | Gearbox v3 |