TR16 MBR 308SR Carbine Replica
A highest-quality and class replica made of highest-quality materials by a known and renowned G&G company. Due to the materials used and technologies implemented, the replica is intended for most demanding Users that value realism and quality.
TR16 MBR was made mainly of metal. Metal parts include the modern and aggressively looking receiver, KEYMOD mounting system rails, the barrel, muzzle device, manipulators and the stock slide. Polymer parts include the ergonomic stock, pistol grip and a Mid-Cap 40 BB magazine.
The stock features room for a battery with a Tamiya-mini connector. The replica uses a profiled pistol grip that improves the grip and the comfort of usage. An enlarged charging handle, a custom trigger or double-sided manipulators provide the replica with a unique, custom character.
The replica stands out from other G&G replicas in terms of the internal parts used as well as the quality of the exterior craftsmanship. The replica features two electronic systems: MOSFET system located in the stock slide and a G2 ETU (Electronic Trigger Unit) system. Both systems extend the lifetime of the replica and improve its parameters like the trigger reaction time and rate of fire.
TR16 MBR is equipped with a novelty by G&G - Gearbox G2 that is characteristic for:
- reinforced construction
- quick spring release system
- double-sealed parts of the pneumatic system
- specially-designed gears for better efficiency
The MOSFET system enables the programming 3-5 round bursts, informs about low battery charge and a damaged gearbox.
The ETU system implemented in the replica together with dedicated magazines cuts off the power after the last BB has been fired.
The set does not include a battery or a charger.
The set includes:
- User’s manual
Replika karabinka TR16 MBR 308SR
It is the spped of bb, while its leaving the innerbarrel of replica. This speed is measured in FPS (Feet Per Second).
1 FPS = 0,3 m/s
1 J = 99 m/s
1 J = 326,7 FPS
Indications v2, v3, v6 does not mean the level of advance, but only shape of gearbox skeleton which was used and selected by the manufacturer depending on the capabilities of the body of the replica. For example, a models of the M4/M16 family, MP5, have a v2 gearbox, while the AK family have gearbox v3.
|Type of fire:|
|Diameter of bearings in GB [mm]:|
The length of the replca is measured between the two most distant points of each other. Different models have several of these values, because of its design allows to increase or decrease it length (eg. folding stock or extended flash hider).
|Inner barrel length [mm]:|
This is a value that includes the weight of the replica, magazine and other accessories that are include in set without a battery, charger, cleaning rod, etc., etc.
|Magazine capacity [pcs]:|
Hop-Up system is used for overclocking bb during the shot (putting it in rotation), through which, it extends its flight path. Acting laws of physics make that bb lift up, while the gravitational force take it down. Appropriate adjustment of Hop-Up, will compensate for these two factors, which result in long and straight flight for longer distance and be greater focus shot (to improve accuracy).
Blow back is a simulation system of the cocking lever - it imitates the work of it as the equivalent sharp. This system raises the realism and adds a lot more experience during shooting.
Metal + plastic
rechargeable battery is characterized by high efficiency
current-carrying capacity, but there are disruptive effect on memory.
Should be unloaded and loaded in the full cycle, ie, it is recommended
to fully discharge, and after unloading must charge the battery
immediately without leaving it for a long time in a discharged state.
|Propulsion / Powered by:|
|Barrel thread type:|