240B Machinegun Replica
The replica was made mainly of high-quality metal. Elements such as the stock, barrel shroud and the anti-slip panel of the transport handle were made of high-quality polymer. The transport handle was made of steel, which directly translates to its stability and durability. The well-aligned construction is characteristic for its significant durability as well as noticeable weight - almost 8 kilograms. The size and weight of the replica limit the freedom of movement in the field. The replica had been equipped with RIS rails located on the barrel shroud as well as on the receiver, which enables the attachment of additional accessories such as a scope, laser sight or a flashlight.
Inside the gearbox there are following elements: a short motor with increased torque, reinforced gears, a pinion gear with four anti-reversal latches, 8 mm ball bearings, ball bearing steel spring guide, air-sealed brass nozzle, chrome type 0 cylinder, silicon piston head seal, m110 spring, 551 mm long 6.03 precision internal barrel and low-resistance wires. Parts implemented in this replica increase its tuning potential.
The set includes:
- replica
- magazine
- charger
- battery
- cover for the magazine
Battery included NiCd
rechargeable battery is characterized by high efficiency
current-carrying capacity, but there are disruptive effect on memory.
Should be unloaded and loaded in the full cycle, ie, it is recommended
to fully discharge, and after unloading must charge the battery
immediately without leaving it for a long time in a discharged state. | No |
| Blow Back Blow back is a simulation system of the cocking lever - it imitates the work of it as the equivalent sharp. This system raises the realism and adds a lot more experience during shooting. | No |
| Product length [cm] | 124 |
| Product weight [g] | 7800 |
| Power supply | Electric |
| Muzzle velocity [FPS] It is the spped of bb, while its leaving the innerbarrel of replica. This speed is measured in FPS (Feet Per Second). 1 FPS = 0,3 m/s 1 J = 99 m/s 1 J = 326,7 FPS | 400 |
| Fire mode | Full-auto |
| Gearbox version Indications v2, v3, v6 does not mean the level of advance, but only shape of gearbox skeleton which was used and selected by the manufacturer depending on the capabilities of the body of the replica. For example, a models of the M4/M16 family, MP5, have a v2 gearbox, while the AK family have gearbox v3. | Gearbox special |
| Hop-Up Hop-Up system is used for overclocking bb during the shot (putting it in rotation), through which, it extends its flight path. Acting laws of physics make that bb lift up, while the gravitational force take it down. Appropriate adjustment of Hop-Up, will compensate for these two factors, which result in long and straight flight for longer distance and be greater focus shot (to improve accuracy). | Yes |
| Inner barrel length [mm]. | 551 |