The rifle replica is made of metal and plastic. The stock and the body are made of plastic while the other elements are made of metal and that includes the stock’s foot. The replica is equipped with adjustable iron aiming sights. The gas valve is located in the lower barrel and is secured by a plug. The replica is equipped with an internal magazine holding 30 BB pellets.
The loading takes place through a hole located on the right side of the bolt with the use of the device attached to the set. Just like in the original weapon you can reload the replica using the cocking handle. At the same time, the hammer is being cocked which is released after the shot. The hammer can be also cocked without the use of the cocking handle, yet it does not reload the replica and, therefore, it does not make it ready to shoot.
The set includes:
-the replica - the loading device - set of tools
Blow Back
Blow back is a simulation system of the cocking lever - it imitates the
work of it as the equivalent sharp. This system raises the realism and
adds a lot more experience during shooting.
No
Product length [cm]
96
Product weight [g]
2500
Power supply
Gas
Dystrybutor Odpowiedzialny w UE
GF CORP Sp. Z o.o. Sp.k. ul. Jana Długosza 42-46 51-162 Wrocław Polska info@gfcorp.pl
Muzzle velocity [FPS]
It is the spped of bb, while its leaving the innerbarrel of replica. This speed is measured in FPS (Feet Per Second).
1 FPS = 0,3 m/s
1 J = 99 m/s
1 J = 326,7 FPS
340
Fire mode
Semi-auto
Hop-Up
Hop-Up system is used for overclocking bb during the shot (putting it in rotation), through which, it extends its flight path. Acting laws of physics make that bb lift up, while the gravitational force take it down. Appropriate adjustment of Hop-Up, will compensate for these two factors, which result in long and straight flight for longer distance and be greater focus shot (to improve accuracy).
Yes
Inner barrel length [mm].
469
Length minimal [mm]
960
Magazine capacity [pcs.]
30
Producent odpowiedzialny w UE
AIK-SAMYUE TECHNOLOGY INDUSTRY LIMITED WORKSHOP UNIT 4 ON 8/F OF BLOCK B1, HANG WEI INDL CTR, NO.6 KINTAI ST , TUEN MUN , HONG KONG sale@battleaxeairsoft.asia
In the YouTube video linkred to, hhe says it has a REAL WOOD - that's NOT true it's plastic look a'like.. SHAME - have just orded this after watching the video...
A copy of the discontinued Marushin replica. Beautiful, elegant, powerful, accurate, silent, I love it! Accurate to 60 metres with 0,43! But soon the barrel starts to wobble slightly where it's fastened to the receiver. Make sure to tighten the screws under the front grip if they come loose. I wish there was a better made "Limited edition" available, I would gladly pay 250 for it if it was more solid. Because I am now addicted to lever action!
There are a few things to point out, the gun itself is amazing despite these facts. Brace thyselves for lenghty review!
First thing that struck was slight gas leakage, but that was fixed with two sizes of screwdrivers, turning the valve into right position and lubing it.
The internal magazine feeds to the last bb, holds up to 25 rounds, but I've had several malfunctions with filling it to the top. Sticking with the 22 loader cap is the best thing I can advise, else it has feed problems.
The action is slick, but at times the bullet receiver does not go all the way up, failing to feed the bb, resulting in dryfire. (about once in twenty shots) Lubing seemed to help a little, but I still encountered feeding problems further down the road.
The sights are a bit loose, prone to messing up if you accidentally knock them. The flip up sights are surprisingly useful if you set your hop up for 15 meters and have to pick a 30m shot.
The gun is easy enough to zero in and the accuracy is a bliss with 0.36g. I also tested 0.25 which were somewhat passable and 0.20 which just went their own merry way all over the place. I would not go lighter than 0.30. (Tested at 15 and 30 meters, the gun had little difficulty hitting A4 size targets at the former, and could be a trickshot at latter)
If filled up to the max, the gun goes up to 450fps and hits really hard with heftier ammo, pretty true to it's real counterpart!
Ran abour 300 rounds through it and I am very pleased about how this one turned out. Hope to give it a proper season this year. Definitely worth the money.
4/5 simply because it has minor mechanical flaws.
Didn't shoot it over the chrony, because I don't have one, but evry shot hits the bullseye, at 10, 20 and 35 meters!
I love the way how this looks and it won't looks different than my real Winchesters. Untill you hold it, you feel the fake wood and it's a litlle hollow.
So I filled the stock with kit. Now it's heavier and more balanced.
5 stars!!!
The gun looks really nice. I have a real steal '92 winchester and I compared them. Most of the details are correct and the replica looks realy like its original. The one star substraction is for the missing manual. You have to find out for yourself how it works. For its money its a great buy!
Smooth action on the lever I really like it..shoots a 420 fps...on greengas..on low pressure gas shoots 240..serious accuracy and range....lost a star because there was no manual with it so id to guess were the hop up was and the stock is not great:D
Great accuracy, great replica. 450 FPS out of the box ( with green gas + Dragon DCH 330 chrono+ 30 Celsius) Full metal + abs wood imitation looks and feels great !
Good finish and sturdy build quality on the metalwork, the fake wood finish looks pretty good too, great fun to shoot, mine puts out 400+fps, something different!