E&L ELAK74M3 Platinum GATE ASTER SE V3
Brand E&L Airsoft, known for producing realistic and indestructible replicas in wood and steel, this time presents the latest upgrade to the AK-74 carbine.
ELAK 74 M3 is a replica of the AK RMO carbine (Ремонтно-Модернизационный Обвес - Repair and Modernisation Kit) or KM-AK (Комплект Модернизации - Modernisation Kit), that is, a refurbished, equipped AK-74 modernisation kit with a new barrel. The AK-RMO is an answer to the requirements of the modern battlefield prepared for old worn-out AK-74 carbines. The kit consists ofa slotted flame suppressor also acting as a compensator to facilitate night vision shooting. New handguard and gas tube cap fitted with RIS rails to allow the mounting of additional accessories. New, simplified stock known from the AKS-74U. Hinged locking chamber cover with RIS rail allowing for secure mounting of optics. Ergonomic pistol grip, functional magazine, extendable and folding stock and fire mode switch familiar from the AK-12. Thanks to the new barrels and the possibility of fitting aftermarket accessories, tuning parts for other AK series carbines (Zenitco, VS, Hexagon, etc.), reliability, ergonomics, it has gained sympathy among Russian soldiers and is more desirable to scouts and commandos than the AK-12 carbine. In the firearm version, the kit also included a sound suppressor, carrying belt, pouch and vertical grip.
The carbine belongs to the Platinum series in a limited edition of only 500 piecesin which the level of attention to detail has been brought to perfection. Inside the replicas of this series, you will find a number of high quality parts to improve both performance and durability, characteristic of high-end tuning replicas.
Carbine features:
- Construction in oxidised steel, without the use of ZnAl components
- Set of RIS rails on the handguard and gas cap allowing the installation of additional grips, torches, etc.
- Locking chamber cover with hinged RIS rail allowing for secure mounting of optics
- Removable and folding stock, magazine and AK-12 type pistol grip
- Selector with additional shelf allowing one finger to unlock the replica
- Slotted flame suppressor mounted on 24mm CW thread
- Space for battery under the breech cover
- Metal Hop-up chamber with a 6.03mm
- Ability to partially disassemble the replica like a flammable equivalent - without tools
- Insert magwell spacer, facilitating magazine change
The V3 gearbox with which the replica features quick spring change system, a set of reinforced parts and a layout GATE ASTER SE V3. The ASTER SE V3 from Polish company GATE is an advanced ETU offering adjustable trigger sensitivity, Active-Break and adjustable series.
Also inside you will find components such as:
- Hi-Torque motor on 21T neodymium magnets
- Set of steel gears 13:1
- 9mm steel bearings in 2 x Slide, 4 x Ball configuration
- One-piece steel cylinder assembly CNC machined
- Reinforced piston
.Package include:
- QC certificate
- E&L Commemorative Challenge Coin
- GATE ASTER diagnostic card
- Mid-Cap Magazine
- Patch
- Replica
Package exclude:
- The set does not include the battery nor charger
Battery included NiCd
rechargeable battery is characterized by high efficiency
current-carrying capacity, but there are disruptive effect on memory.
Should be unloaded and loaded in the full cycle, ie, it is recommended
to fully discharge, and after unloading must charge the battery
immediately without leaving it for a long time in a discharged state. | No |
| Bearings diameter [mm] | 9 |
| Blow Back Blow back is a simulation system of the cocking lever - it imitates the work of it as the equivalent sharp. This system raises the realism and adds a lot more experience during shooting. | No |
| Colour | Black |
| Product length [cm] | 101 |
| Product weight [g] | 4385 |
| Power supply | Electric |
| Muzzle velocity [FPS] It is the spped of bb, while its leaving the innerbarrel of replica. This speed is measured in FPS (Feet Per Second). 1 FPS = 0,3 m/s 1 J = 99 m/s 1 J = 326,7 FPS | 400 |
| Fire mode | Full-auto Adjusted burst Semi-auto |
| Gearbox version Indications v2, v3, v6 does not mean the level of advance, but only shape of gearbox skeleton which was used and selected by the manufacturer depending on the capabilities of the body of the replica. For example, a models of the M4/M16 family, MP5, have a v2 gearbox, while the AK family have gearbox v3. | Gearbox v3 |