DropZone - CM052-S – machinegun replica
The machinegun replica is made fully of metal and wooden elements. The replica’s body, the flash0hider, the dust cover, the gas-pipe dummy and the bipod are made of steel and the other metal elements are made of ZnAl. The stock which holds the battery and the front-grip cover are made of plywood. The only outer elements that are made of plastic is the magazine holding 800 BB pellets and the polymer pistol grip.
The long barrel (455mm) ensures a great precision of shots, the muzzle velocity of 420 FPS – a great range and the hi-cap type magazine holding 800 BB pellets ensures us that we will not be short of ammunition in case of a firefight. These features make the replica a perfect support weapon for any airsoft team.
The Hop-up chamber is made fully of metal while the whole mechanism consists, inter alia of a reinforced steel gearbox frame equipped with 7mm ball bearings, steel reinforced thread-wheels and directional piston head. The replica is by default equipped with a M125 main spring that is located on a reinforced ball bearing spring guide.
The full compatibility with the classical magazines allows not only to use the magazines of your friend while an exhausting firefight, but also to use this replica as a sharp shooter’s weapon. The bipod which folds alongside the barrel will do its job in both cases, nevertheless, it is possible to detach the bipod with only little effort in order to lower the replica’s weight The replica ‘s stock may be folded in order to transport the replica.
The set includes:
- the replica,
- a magazine,
- a battery,
- a charger,
Replika karabinu maszynowego - CM052-S
It is the spped of bb, while its leaving the innerbarrel of replica. This speed is measured in FPS (Feet Per Second).
1 FPS = 0,3 m/s
1 J = 99 m/s
1 J = 326,7 FPS
|Propulsion / Powered by:|
Indications v2, v3, v6 does not mean the level of advance, but only shape of gearbox skeleton which was used and selected by the manufacturer depending on the capabilities of the body of the replica. For example, a models of the M4/M16 family, MP5, have a v2 gearbox, while the AK family have gearbox v3.
|Type of fire:|
Steel + wood + metal + plastic
The length of the replca is measured between the two most distant points of each other. Different models have several of these values, because of its design allows to increase or decrease it length (eg. folding stock or extended flash hider).
|Inner barrel length [mm]:|
This is a value that includes the weight of the replica, magazine and other accessories that are include in set without a battery, charger, cleaning rod, etc., etc.
|Battery Voltage [V]:|
|Battery Capacity [mAh]:|
Battery capacity determines the time, which it accumulated enough energy to work gearbox. The greater capacity, then replica will shoot longer.
rechargeable battery is characterized by high efficiency
current-carrying capacity, but there are disruptive effect on memory.
Should be unloaded and loaded in the full cycle, ie, it is recommended
to fully discharge, and after unloading must charge the battery
immediately without leaving it for a long time in a discharged state.
|Magazine capacity [pcs]:|
Hop-Up system is used for overclocking bb during the shot (putting it in rotation), through which, it extends its flight path. Acting laws of physics make that bb lift up, while the gravitational force take it down. Appropriate adjustment of Hop-Up, will compensate for these two factors, which result in long and straight flight for longer distance and be greater focus shot (to improve accuracy).
Blow back is a simulation system of the cocking lever - it imitates the work of it as the equivalent sharp. This system raises the realism and adds a lot more experience during shooting.