CM126S MOSFET electric pistol replica
The replica is made of durable polymer and metal. Small internal parts and parts of the magazine are made of metal. The frame and lock of the replica are made of polymer.
The replica is electrically powered, so it can be used during winter games without any problems. A great advantage of this gun is the Hop-Up system, which makes it possible to increase the performance of the replica. The discharge speed allows it to be used in buildings and at very short distances.
This series of CYMA pistols is equipped with a built-in MOSFET chip, which improves the performance of the replica, such as trigger response and rapid firing.
The design of the replica allows both single and continuous fire. The wing fire selector is located in the rear part of the breech, while the safety on the right side of the replica.
Please note that the replica does not include a battery and charger.
The kit includes
- replica
- low-cap magazine for 30 rounds
- quick charger
Suggested battery model: Specna Arms x Gens Ace 620 mAh 25C 7.4V T-Deans mini G-Tech Li-Po battery pack Specna Arms x Gens Ace 550 mAh 20C 7.4V T-Deans mini G-Tech Li-Po battery pack
Battery included NiCd
rechargeable battery is characterized by high efficiency
current-carrying capacity, but there are disruptive effect on memory.
Should be unloaded and loaded in the full cycle, ie, it is recommended
to fully discharge, and after unloading must charge the battery
immediately without leaving it for a long time in a discharged state. | No |
| Blow Back Blow back is a simulation system of the cocking lever - it imitates the work of it as the equivalent sharp. This system raises the realism and adds a lot more experience during shooting. | No |
| Product length [cm] | 22 |
| Product weight [g] | 765 |
| Power supply | Electric |
| Muzzle velocity [FPS] It is the spped of bb, while its leaving the innerbarrel of replica. This speed is measured in FPS (Feet Per Second). 1 FPS = 0,3 m/s 1 J = 99 m/s 1 J = 326,7 FPS | 200 |
| Fire mode | Full-auto Semi-auto |
| Gearbox version Indications v2, v3, v6 does not mean the level of advance, but only shape of gearbox skeleton which was used and selected by the manufacturer depending on the capabilities of the body of the replica. For example, a models of the M4/M16 family, MP5, have a v2 gearbox, while the AK family have gearbox v3. | Gearbox special |
| Hop-Up Hop-Up system is used for overclocking bb during the shot (putting it in rotation), through which, it extends its flight path. Acting laws of physics make that bb lift up, while the gravitational force take it down. Appropriate adjustment of Hop-Up, will compensate for these two factors, which result in long and straight flight for longer distance and be greater focus shot (to improve accuracy). | Yes |
| Length minimal [mm] | 220 |