Dan Wesson 2.5” Revolver Replica - Gold
The replica is made from metal and polymer. The element that was made from
polymer is the pistol grip. Its surface is coarse, which makes it fit in a
stable way to the user’s hand. The front of the grip is profiled.
The revolver is powered by CO2. The bullet chamber is located in the pistol
grip and can be opened after the removal of the grip lining. Muzzle velocity
equals to ~400 FPS. Once several shots have been fired, it stabilizes on ~380
FPS.
Magazine consists of a drum, into which 6 dummy shells are inserted carrying 1
BB each. Shot can be fired by squeeze the trigger or cocking the hammer prior.
When the hammer is cocked the trigger operates more lightly. The replica is
equipped with a RIS 22 mm mounting rail located under the barrel. The mounting rail
is attached with a hex screw and it can be removed.
Made of | plastic + metal |
Muzzle velocity [FPS]![]() It is the spped of bb, while its leaving the innerbarrel of replica. This speed is measured in FPS (Feet Per Second). 1 FPS = 0,3 m/s 1 J = 99 m/s 1 J = 326,7 FPS | 370 |
Length [mm] | 200 |
Weight [g] | 900 |
Fire mode | Semi-auto |
Magazine capacity [pcs.] | 6 |
Hop-Up![]() Hop-Up system is used for overclocking bb during the shot (putting it in rotation), through which, it extends its flight path. Acting laws of physics make that bb lift up, while the gravitational force take it down. Appropriate adjustment of Hop-Up, will compensate for these two factors, which result in long and straight flight for longer distance and be greater focus shot (to improve accuracy). | No |