Take advantage of free delivery for orders of €350 and above!
CurrencyDeliveryPolandLanguageGunfire PolskaGunfire in EnglishGunfire en FranceGunfire en EspañaGunfire ​​in NederlandGunfire in Czech
  • EL-105 assault rifle replica (Gen. 2)
  • EL-105 assault rifle replica (Gen. 2)
  • EL-105 assault rifle replica (Gen. 2)
  • EL-105 assault rifle replica (Gen. 2)
  • EL-105 assault rifle replica (Gen. 2)
  • EL-105 assault rifle replica (Gen. 2)
  • EL-105 assault rifle replica (Gen. 2)
  • EL-105 assault rifle replica (Gen. 2)
  • EL-105 assault rifle replica (Gen. 2)
  • EL-105 assault rifle replica (Gen. 2)
  • EL-105 assault rifle replica (Gen. 2)
  • EL-105 assault rifle replica (Gen. 2)
  • EL-105 assault rifle replica (Gen. 2)
  • EL-105 assault rifle replica (Gen. 2)
  • EL-105 assault rifle replica (Gen. 2)
  • EL-105 assault rifle replica (Gen. 2)
  • EL-105 assault rifle replica (Gen. 2)
  • EL-105 assault rifle replica (Gen. 2)
  • EL-105 assault rifle replica (Gen. 2)
  • EL-105 assault rifle replica (Gen. 2)
  • EL-105 assault rifle replica (Gen. 2)
  • EL-105 assault rifle replica (Gen. 2)
  • EL-105 assault rifle replica (Gen. 2)
  • EL-105 assault rifle replica (Gen. 2)

EL-105 assault rifle replica (Gen. 2)

  • Generation 2 Quick Spring Release System Material: steel + plastic Weight: 3360g Length: 591/837mm Muzzle velocity: ~420 FPS Powered by: battery Manufacturer: E&L
  • Product code: EIL-01-005792
277,97 €
277,97 €
/ pcs
Quantity
Add to Favorites Compare
Ready to ship in
Paczkomatywysyłka inpost - NO
Delivery cost from 0,00 €
Product description

EL-105 assault rifle replica (Gen. 2)

E&L Airsoft is a new quality on the airsoft market. The manufacturer has set himself the task of creating replicas with the highest possible quality of materials and perfect fitting, resembling the real steels as close as possible and went in this direction as far as he could - by starting production at the same factory, which produced a firearm!

Therefore E&L's products are made with use of steel, hand finished wood components and high-quality composite and definitely can compete with the best brands on the market - also in price. The quality and performance allow it to be both a beautiful wall decoration as well as very effective skirmish gun. Also, some parts of the exterior are the same as in the original weapon and come off the same production line!

Externally, the maximum possible number of elements was made ​as ​a 1:1 copy of the original, fully according to military specifications. This means you can exchange elements between the replica and the real steel! This applies to items such as the front bed, gas pipe, iron sights and cleaning rod. Hardly any other manufacturer offers that.

Steel components have been oxidized, which makes them look even more realistic. Also, the attrition process which takes place over time makes oxidized surfaces look much better than it happens by painted or varnished guns.

Also in terms of weight  ​​all was made to ensure realism. The replica is heavy, and a full steel outer barrel ensures proper balance. A notable feature is certainly the possibility of a partial field-stripping of the replica, like it takes place with the a real steel - with no tools required. Everything is based on pins and levers. The manufacturer paid attention to even of the smallest of details to make their product as close a resemblence to the real steel as possible.

Both the foregrip and gas pipe cap have been made of black polymer.

The „104” models have a shorter barrel, making the gun much more compact. The barrel's end is fitted with a special type of flash hider and gas pipe with integrated sights.

The replica is equipped with a LMT type buttstok ending with a rubber pad. It's regulated, allowing it to be adjusted to the shooters built and individual preferences. A SAW type pistol grip is made of polymer, its shape allowing for a more comfortable and firm hold on the replica. 

The left side of the receiver is equipped with a dovetail mount, suitable for the dedicated optical sights (including the original, designed for a firearm), as well as mounts allowing transition to RIS standard used as base for mounting of virtually any type of optics.

Taken straight from the box, the replica is secured in a thick, technical oil that safeguards the product from humidity and possible contamination during transport. A mixture of oil, steel and lacquered wood emits a unique smell, well-known to people in constant contact with firearms.

The replica's battery is located under the lid of the receiver. The cover is mounted on a latch, which allows its rapid removal and replacement of the power source at any time.

The insides of the product are also remarkable. E&L engineers have taken the best solutions on the market and added their own. The pneumatic system consists of a set of silent piston head and a cylinder, which increases the system’s longevity through better amortization. The spring slide has bearings and the piston gear has a bigger inhibitor. It gives the BB more time to be inserted in the chamber, which is of great importance in the case of high rate of fire configurations.

Both of the mentioned solutions result in smoother operation, greater ROF and smaller energy consumption. High accuracy and focus is guaranteed by an equipped internal, precision barrel with a diameter of 6,04 mm.

What parts we can find inside the E&L Gen.2?

- new type, reinforced gearbox frame, based on 9mm ball bearings
- QSR ball bearing spring quide (Quick Spring Release)
- full steel gear set, made on CNC
- one-piece steel cylinder, made on CNC
Air Seal Nozzle with O-ring
- set of 9mm ball bearings
- reinforced POM piston with 3 steel teeth
- silenced piston head
- High Torque M170 motor with neodymium magnets
Low Resistance Silver Cords & Switches

Gen.2 replicas have in stock a really nice feature - Magwell Spacer insert, which really makes magazine change easier and faster!

The replicas are delivered in brand new, practical and elegant boxes. Boxes feature a thick foam padding on the inside, which surely and safely secures the replica and all accessories. Each set includes an oiler, however, fixed stock models include the exact same cleaning kit as the one meant for live firearm.

The replica comes with a polymer, mid-cap magazine with a capacity of up to 120 BBs.

The set includes:

- replica
- magazine
- oil bottle
- cleaning kit
- magwell spacer

Exemplary LiPo battery models, which fit under the chamber cover:

http://gunfire.pl/product-pol-1152198888-Akumulator-LiPo-7-4V-1300mAh-25C.html
http://gunfire.pl/product-pol-1152206129-Akumulator-LiPo-7-4V-1300mAh-25-50C-.html
http://gunfire.pl/product-pol-1152198565-Akumulator-Redox-LiPo-1400-mAh-7-4V-20C.html (requires a T-connect/Tamiya small adapter)

Magazine compatibility: replicas are compatible with majority of magazines by LCT and MAG, use of CM, Boyi and JG magazines may requires some adjustments.

Attention: The set does not contain a battery or a charger.

 

 

Battery included

NiCd rechargeable battery is characterized by high efficiency current-carrying capacity, but there are disruptive effect on memory. Should be unloaded and loaded in the full cycle, ie, it is recommended to fully discharge, and after unloading must charge the battery immediately without leaving it for a long time in a discharged state.
NiMH batteries have a higher self-discharge over time and shorten the life - on the other hand, they earn about 30% more capacity.

No
Blow Back

Blow back is a simulation system of the cocking lever - it imitates the work of it as the equivalent sharp. This system raises the realism and adds a lot more experience during shooting.

No
Product length [cm]
73.50
Product weight [g]
3060
Power supply
Electric
Material
Metal
Plastic
Muzzle velocity [FPS]

It is the spped of bb, while its leaving the innerbarrel of replica. This speed is measured in FPS (Feet Per Second).

1 FPS = 0,3 m/s

1 J = 99 m/s

1 J = 326,7 FPS

420
Fire mode
Full-auto
Semi-auto
Gearbox version

Indications v2, v3, v6 does not mean the level of advance, but only shape of gearbox skeleton which was used and selected by the manufacturer depending on the capabilities of the body of the replica. For example, a models of the M4/M16 family, MP5, have a v2 gearbox, while the AK family have gearbox v3.

Gearbox v3
Hop-Up

Hop-Up system is used for overclocking bb during the shot (putting it in rotation), through which, it extends its flight path. Acting laws of physics make that bb lift up, while the gravitational force take it down. Appropriate adjustment of Hop-Up, will compensate for these two factors, which result in long and straight flight for longer distance and be greater focus shot (to improve accuracy).

Yes
Inner barrel length [mm].
385
Length minimal [mm]
500
Magazine capacity [pcs.]
120
MOSFET/ETU
No
Quick Spring Change system
Yes
Type of plug
Tamiya small
Reviews of our customers
4.50
Number of reviews issued: 4
5
3
4
0
3
1
2
0
1
0
Click a rating to filter reviews
5/5
Opinion confirmed by purchase
2015-04-01
Very solid and extremely sturdy externals. Yet the internals could be better, but with a little bit of work you can make this an extremely great gun that outperforms more expensive guns.
Michael, Haarlem
Was the review helpful? Yes0 No0
5/5
Opinion confirmed by purchase
2014-07-18
this weapon aesthetically very beautiful. I had a problem but solved chargers compatibility with polishing. negative things are: small battery over joules in italy
Filippo, Cervia
Was the review helpful? Yes0 No0
3/5
Opinion confirmed by purchase
2014-03-10
I had some high expectations for this AEG with all of the hype and was rather let down. It does have a very real steel feel to it, hosed down with lubricant when you receive it, but when it all gets wiped away and dried off, it's just another AEG. My first complaint is how hot the gun shoots. It clocked about 390-400fps, so you probably won't be able to use it at most fields with a 1 joule limit. Disassembly is almost straight forward, much like an LCT, except the pins are hammered in very tight and will not come out without a major drag-down fight. I managed to squeeze a hex wrench in there to loosen the barrel to get the gearbox out, which was very tedious. The gearbox was shimmed extremely well, perfectly I might add, and the parts fit nice and snug without much of a fight or struggle to keep things in place when reassembling the rifle. The stock piston does not look like it will stand up to any use with an 11.1v LiPo at lower 1 joule speeds, with full plastic teeth, so that had to go. They did equip it with a silent head piston which gives it a nice clean sound. Putting it back together was just as tedious and I ended up with a pinch somewhere in the wiring, my fault, so that blew the fuse, which is a 25A low profile automotive fuse. Good luck finding one of these nearby. Luckily regular and mini automotive fuses still fit, at a sacrifice to battery space. Doing some aftermarket furniture mods, such as the Asura Dynamics lower handguard, Hephaestus 6-position folding stock or modified seletor lever, will not be a straightforward ordeal, as the E&L's dimensions are slightly different from LCT, and you will be doing some filing, dremeling and ordering more parts to try to get everything to fit. in trying to hammer out the pin for the folding stock, somehow the optic rail worked itself free and swung off, revealing rather shotty rivet work. Overall, I would say this may be a cheaper alternative to the latest generation of LCT's; however, with all of the qualms and odd dimensions and compatibility issues, you would probably be better off sticking it out for an LCT.
Ryan, APO
Was the review helpful? Yes0 No0
5/5
Opinion confirmed by purchase
2014-01-24
I love the feel and smell of this weapon, it is well made with lots of steel parts so it feels the right weight. On it's first outing (a weekend game) it performed well, mine was downgraded by Gunfire to UK spec and using .25bb's it had a good range and had no feeding issues also worked well with my Real Sword magazines. Great gun!
Andrew, Chesham
Was the review helpful? Yes0 No0
Write a review
Your review:
5/5
Add your own product photo:
If this description is not sufficient, please send us a question about this product. We will reply as soon as possible.

Data is processed in accordance with the privacy policy. By submitting data, you accept privacy policy provisions.

Fields marked with an asterisk are required
If you want to tell your friend about this product, please use the form below.
You can add more email addresses by separating them with a coma
Fields marked with an asterisk are required
This page uses cookie files to provide its services in accordance to Cookies Usage Policy. You can determine conditions of storing or access to cookie files in your web browser.
Close
pixel