24 miesiące - Warranty is granted by the retailer for a period of 24 months.
FB6604 Carbine Replica
FB6604 carbine replica was made from metal and durable polymer. The receiver, external barrel, iron sights and small elements such as the trigger, magazine release button or fire mode selector were made from metal. The stock and profiled pistol grip as well as a classic handguard were made from polymer.
The battery is stored in the nylon handguard. The replica is equipped with a mini connector type with a MOSFET module. Reinforced TORQUE-UP gears, metal spring slide, reinforced gearbox frame and reinforced piston with metal teeth all add to the replica’s lifetime. The engine with increased torque together with low-resistance wiring significantly increase its efficiency.
The replica has implemented metal ball bearings and bearing-mounted piston head as well as a ball bearing on the pinion gear. Another pleasant surprise revealed upon opening of the gearbox is a delayer clip and a new type tappet plate, eight anti-reversal latches as well as a chrome cylinder. In addition, the replica uses a 6.04 mm precision barrel with a HU bucking attached using heat, which significantly increases the tightness of the system.The set includes:
- replica
- magazine
- battery
- charger
Battery included NiCd
rechargeable battery is characterized by high efficiency
current-carrying capacity, but there are disruptive effect on memory.
Should be unloaded and loaded in the full cycle, ie, it is recommended
to fully discharge, and after unloading must charge the battery
immediately without leaving it for a long time in a discharged state. | Yes |
| Blow Back Blow back is a simulation system of the cocking lever - it imitates the work of it as the equivalent sharp. This system raises the realism and adds a lot more experience during shooting. | No |
| Product length [cm] | 85.50 |
| Product weight [g] | 3062 |
| Power supply | Electric |
| Material | Metal Plastic |
| Muzzle velocity [FPS] It is the spped of bb, while its leaving the innerbarrel of replica. This speed is measured in FPS (Feet Per Second). 1 FPS = 0,3 m/s 1 J = 99 m/s 1 J = 326,7 FPS | 400 |
| Fire mode | Full-auto Semi-auto |
| Gearbox version Indications v2, v3, v6 does not mean the level of advance, but only shape of gearbox skeleton which was used and selected by the manufacturer depending on the capabilities of the body of the replica. For example, a models of the M4/M16 family, MP5, have a v2 gearbox, while the AK family have gearbox v3. | Gearbox v2 |
| Hop-Up Hop-Up system is used for overclocking bb during the shot (putting it in rotation), through which, it extends its flight path. Acting laws of physics make that bb lift up, while the gravitational force take it down. Appropriate adjustment of Hop-Up, will compensate for these two factors, which result in long and straight flight for longer distance and be greater focus shot (to improve accuracy). | Yes |