GFG07 CQBR carbine replica
The GFG07 replica is made of metal and durable plastic. The replica’s body, the stock’s pipe, the outer barrel, the RIS rails, the iron aiming sights and all of the minor elements such as the trigger, the magazine release lever or the firing mode selector lever are made of metal. The stock and the profiled pistol grip, just like the RIS rail covering panels are made of plastic.
The battery which is includes in the set is located in the SF type stock. The carbine is equipped with a large type plug with a installed MOSFET system. The reinforced TORQUE-UP thread-wheels, the metal spring guide, the reinforced gearbox frame and the reinforced piston increase the replica’s lifespan while the high torque motor combined with the low-resistance wiring significantly increase the efficiency of the replica.
Metal ball bearings, a ball bearing piston head and also a ball bearing situated in the motor thread-wheel were used in this construction. The next nice surprises which await us after we take the gearbox apart are: the delayer and the new generation tappet plate and the chromed cylinder.
The Hop-Up rubber which is installed with the use of temperature ensures a great sealing of the system while the standard 6,04 precision barrel significantly raises the utility value of the replica.
The set does not include a battery or a charger.
The set includes:
- the replica
- a magazine
Replika karabinka GFG07 CQBR
It is the spped of bb, while its leaving the innerbarrel of replica. This speed is measured in FPS (Feet Per Second).
1 FPS = 0,3 m/s
1 J = 99 m/s
1 J = 326,7 FPS
|Propulsion / Powered by:|
Indications v2, v3, v6 does not mean the level of advance, but only shape of gearbox skeleton which was used and selected by the manufacturer depending on the capabilities of the body of the replica. For example, a models of the M4/M16 family, MP5, have a v2 gearbox, while the AK family have gearbox v3.
|Type of fire:|
The length of the replca is measured between the two most distant points of each other. Different models have several of these values, because of its design allows to increase or decrease it length (eg. folding stock or extended flash hider).
715 / 800
This is a value that includes the weight of the replica, magazine and other accessories that are include in set without a battery, charger, cleaning rod, etc., etc.
|Magazine capacity [pcs]:|
Hop-Up system is used for overclocking bb during the shot (putting it in rotation), through which, it extends its flight path. Acting laws of physics make that bb lift up, while the gravitational force take it down. Appropriate adjustment of Hop-Up, will compensate for these two factors, which result in long and straight flight for longer distance and be greater focus shot (to improve accuracy).
Blow back is a simulation system of the cocking lever - it imitates the work of it as the equivalent sharp. This system raises the realism and adds a lot more experience during shooting.
Metal + plastic
rechargeable battery is characterized by high efficiency
current-carrying capacity, but there are disruptive effect on memory.
Should be unloaded and loaded in the full cycle, ie, it is recommended
to fully discharge, and after unloading must charge the battery
immediately without leaving it for a long time in a discharged state.