Sig Sauer ProForce P320 M18 (Green Gas) Pistol Replica
A licensed replica of a US Army standard-issue pistol - Sig Sauer M18 - powered by green gas. The replica was made of metal and polymer. As in the case of the original, here also the frame was made from polymer. The slide was made of metal. The replica can be fed both CO2 as well as green gas magazines.
The trigger mechanism operates in DAO (double action only) mode - which means that firing the gun is possible only by so-called “self-cocking” - by squeezing the trigger completely through the hammer first becomes cocked and then released resulting in a shot. The safety lever is located on both sides of the pistol, which makes it comfortable to use for both left- and right-handed users.
The replica has a realistic Blow-Back system that sets the bolt carrier into motion when firing a shot. The slide is locked in rear position after firing the last shot from the magazine. Thanks to an air-tight gas system, the replica fires BBs with a muzzle velocity of ~320 FPS.
The left side features a magazine release button, the slide lock lever and the safety are double-sided.
Under the barrel there is a RIS / Picatinny mounting rail thanks to which the replica can be equipped with additional accessories such as a laser sight or a flashlight. The top of the slide features notches that enable attaching Docter type red dot sights (in order to attach one, a special plate is necessary).
The replica comes with a metal magazine with a capacity of up to 21 BBs.
The set includes:
- replica
- magazine
Blow Back Blow back is a simulation system of the cocking lever - it imitates the work of it as the equivalent sharp. This system raises the realism and adds a lot more experience during shooting. | Yes |
| Product length [cm] | 19.30 |
| Product weight [g] | 695 |
| Power supply | Gas |
| Material | Metal Plastic |
| Muzzle velocity [FPS] It is the spped of bb, while its leaving the innerbarrel of replica. This speed is measured in FPS (Feet Per Second). 1 FPS = 0,3 m/s 1 J = 99 m/s 1 J = 326,7 FPS | 320 |
| Fire mode | Semi-auto |
| Hop-Up Hop-Up system is used for overclocking bb during the shot (putting it in rotation), through which, it extends its flight path. Acting laws of physics make that bb lift up, while the gravitational force take it down. Appropriate adjustment of Hop-Up, will compensate for these two factors, which result in long and straight flight for longer distance and be greater focus shot (to improve accuracy). | Yes |
| Length minimal [mm] | 193 |
| Magazine capacity [pcs.] | 21 |