Specna Arms SA-F01 FLEX™ Gen.2 HAL ETU™airsoft Carbine
SpecnaArms Flex Gen.2 carbines have been developed to provide the best possible user experience at an attractive price. Based on experience, passion, commitment, the carbines have been redesigned for even better performance that will allow the user to take a factory product out of the box that is up to any task on the airsoft field.
To this end, the Flex Gen.2 has been equipped with, among other things:
- A rotating TDC Magnus™ (Top Down Center) Hop-Up chamber that allows for very accurate and stable adjustment (covered by European Patent number 015052069-0001)
- Helium™ Flat Hop Eraser that will improve the stability of the ball's undercurve
- Aluminium sealed nozzle
- Æther™ Gearbox - reinforced frame (covered by European Patent number: 015044865-0001), equipped with:
- mainspring release function
- pre-cocking and AoE inspection windows
- reinforced front
- inspection windows for easy priming
- trigger adjustment function
- screw holes for frame alignment
- Ready for use with M140 springs
Features of the HAL™ system:
-trigger detection based on magnetic sensors and Hall effect
-active brake
-binary trigger
-adjustable trigger sensitivity (5 levels from 20 to 100%)
-adjustable pre-cocking (6 levels)
-aUTO programmable fire modes (full auto, semi, 3-rd burst, 5-rd burst)
-sEMI programmable fire modes (semi, binary, AUG, sniper)
-easy programming via trigger
-low battery alarm
-compatible with brushless motors
**The AUTO function fires a 3 round burst first then fires Full Auto.
Nylon fibre-reinforced polymer is used for the body, front, slide and battery compartment of the enlarged SF buttstock and pistol grip. Aluminium and ZnAl alloy is used for the barrel, flame damper, enlarged reloading handle, dummy breech block and manipulators. All screws, pins, the ejection window, the QD sling assembly and the dummy slide are made of steel. All markings and the serial number have been applied to the barrel.
The replica is very well-fitted, the user will not notice any play between the lower and upper parts of the body. The use of the body and front made of lightweight polymer allowed for the reduction of weight, which makes it perfect as a replica for dynamic CQB games. Furthermore, the nylon fibre reinforcement makes the construction more robust than other polymer constructions.
The replica uses the quick spring change system, ESA™. This allows the replica's power to be quickly and efficiently adapted to the conditions expected on the field of play without the need for access to a workshop or a range of specialised tools.
In addition to the internal parts mentioned ( TDC Magnus™ chamber, Æther™ gearbox shell, Helium™ flat rubber, sealed aluminium nozzle), inside the replica you will find, among others:
- 8mm plain bearings
- steel gears
- polycarbonate piston with full steel slats
- a high-quality 6.03mm precision barrel
Features of the replica:
- lightweight and compact design.
- hAL™ system.
- sF type stock
- Ergonomic pistol grip.
- front with RIS rails
-ESA™ quick-change spring system
- Folding sighting instruments.
Package include:
- S-Mag Hi-Cap Magazine
- Cleaning rod
- Replica
- Allen key
- Small Tamyia - Deans adapter
- M90 additional spring
Package exclude:
- The set does not include the battery nor charger
NOTE!!!
When starting the replica for the first time, immediately after connecting the batteries, hold the trigger in SAFE mode for about 5 seconds to activate the HAL™ module
| Based on | M4 / AR15 / M16 |
| Colour | Black |
Battery included![]() NiCd
rechargeable battery is characterized by high efficiency
current-carrying capacity, but there are disruptive effect on memory.
Should be unloaded and loaded in the full cycle, ie, it is recommended
to fully discharge, and after unloading must charge the battery
immediately without leaving it for a long time in a discharged state. | No |
| Bearings diameter [mm] | 8 |
Blow Back![]() Blow back is a simulation system of the cocking lever - it imitates the work of it as the equivalent sharp. This system raises the realism and adds a lot more experience during shooting. | No |
| Overall length | 740 mm |
| Product weight [g] | 2170 |
| Power source | Electric |
| Material | Aluminum Polymer |
Muzzle velocity![]() It is the spped of bb, while its leaving the innerbarrel of replica. This speed is measured in FPS (Feet Per Second). 1 FPS = 0,3 m/s 1 J = 99 m/s 1 J = 326,7 FPS | 390 FPS |
Entity responsible for this product in the EU | GF CORP SP. Z O.O. SP. K.More Address : Jana Długosza 42-46Postal code : 51-162City : WrocławCountry : PolandE-mail : info@gfcorp.pl |


