In a set
Specna Arms SA-F14 FLEX™ Gen.2 HAL ETU™ airsoft Carbine OlivePrice: 182,50 € / pcs
Specna Arms Easy Charger and Battery Pack 11.1V 1000 mAhPrice: 30,00 € / pcs
Specna Arms Stalker type mask OlivePrice: 11,50 € / pcs
BBs 0.30g Specna Arms Core ™ 3000 pcsPrice: 8,25 € / pcs
Pheos One Safety Glasses - Specna Arms EditionPrice: 9,75 € / pcs
SA-F14 FLEX in a Starter Pack
This kit is put together so you immediately have a compatible base, power supply, BBs, transport and basic protection. No guessing connectors, battery capacity, or wondering whether the selected BBs will work properly with the replica.
It is a good choice if you want to get into airsoft with your squad or start on your own, but right away with gear that is easy to use and delivers stable, predictable shooting.
Key benefits
- a start without chaos — everything that most often blocks the first game is included in one kit
- more confidence on the field — it is easier to focus on movement, communication and aiming instead of fighting your gear
- faster learning — predictable replica behavior helps you build basic habits
- a safer start — basic eye and face protection is included
- calm logistics — the 110 cm bag makes carrying and storing the replica easier
Base platform — Specna Arms SA-F14 FLEX Gen.2 HAL ETU
FLEX Gen.2 is built for solid stock performance, so a new player gets a replica that does not require immediate servicing or modifications at the start. The build is lightweight and compact, which helps in CQB and dynamic gameplay — it causes less arm fatigue and makes corner work faster.
Inside, the replica uses solutions focused on repeatability, more stable Hop-Up performance and improved air seal. This gives predictable shooting and makes the replica a convenient base for learning and first games.
Technical advantages you can feel in-game
The SA-F14 FLEX Gen.2 HAL ETU is equipped with solutions that support stable operation and make it easier to adapt the replica to different limits used on airsoft fields.
Key technical features:
- TDC Magnus — more stable Hop-Up adjustment, making it easier to set a repeatable BB trajectory
- Helium Flat Hop — Hop-Up bucking supporting more stable lift, especially with 0.30 g BBs
- 6.03 mm precision inner barrel — better shot control and more predictable replica behavior
- improved air seal — better repeatability of the replica’s operation
- ESA system and M90 spring included — easier adjustment to FPS/J limits, including indoor gameplay
Play comfort: power, ammo, protection and transport
At the start, two things most often cause problems: compatible power supply and safety. In this set, the basics are already matched, so instead of completing them separately, you can move faster into training and your first games.
- Power supply — Specna Arms Easy set: charger and 11.1 V 1000 mAh battery, selected as a sensible starting baseline
- 0.30 g BBs — 3000 pcs. — more stable flight and better trajectory control, especially with Flat Hop
- Eye and face protection — protective glasses and mask, so you can approach your first games safely
- Transport — the 110 cm bag makes carrying and storing the replica easier
Set contents
- Specna Arms SA-F14 FLEX Gen.2 HAL ETU rifle — Olive
- Specna Arms Easy set — charger and 11.1 V 1000 mAh battery
- Specna Arms CORE 0.30 g precision BBs — 3000 pcs.
- 110 cm transport bag for the replica
- Pheos One Protective Glasses – Specna Arms Edition
- Specna Arms Stalker mask
Important first-start note: on the first start, right after connecting the battery, set the replica to SAFE and hold the trigger for about 5 seconds to activate the HAL module.
After use: remember to disconnect the battery from the replica.
| Colour | Olive |
Battery included NiCd
rechargeable battery is characterized by high efficiency
current-carrying capacity, but there are disruptive effect on memory.
Should be unloaded and loaded in the full cycle, ie, it is recommended
to fully discharge, and after unloading must charge the battery
immediately without leaving it for a long time in a discharged state. | Yes |
| Bearings diameter [mm] | 8 |
| Blow Back Blow back is a simulation system of the cocking lever - it imitates the work of it as the equivalent sharp. This system raises the realism and adds a lot more experience during shooting. | No |
| Product length [cm] | 75 |
| Product weight [g] | 2130 |
| Power supply | Electric |
| Material | Aluminum Plastic |
| Muzzle velocity [FPS] It is the spped of bb, while its leaving the innerbarrel of replica. This speed is measured in FPS (Feet Per Second). 1 FPS = 0,3 m/s 1 J = 99 m/s 1 J = 326,7 FPS | 410 |
| Fire mode | Full-auto Adjusted burst Semi-auto |
