Specna Arms SA-F14 FLEX™ Gen.2 HAL ETU™ airsoft Carbine
SpecnaArms Flex Gen.2 carbines have been developed to provide the best possible user experience at an attractive price. Based on experience, passion, commitment, the carbines have been redesigned for even better performance that will allow the user to take a factory product out of the box that is up to any task on the airsoft field.
To this end, the Flex Gen.2 has been equipped with, among other things:
- A rotating TDC Magnus™ (Top Down Center) Hop-Up chamber that allows for very accurate and stable adjustment (covered by European Patent number 015052069-0001)
- Helium™ Flat Hop Eraser that will improve the stability of the ball's undercurve
- Aluminium sealed nozzle
- Æther™ Gearbox - reinforced frame (covered by European Patent number: 015044865-0001), equipped with:
- mainspring release function
- pre-cocking and AoE inspection windows
- reinforced front
- inspection windows for easy priming
- trigger adjustment function
- screw holes for frame alignment
- Ready for use with M140 springs
Features of the HAL™ system:
-trigger detection based on magnetic sensors and Hall effect
-active brake
-binary trigger
-adjustable trigger sensitivity (5 levels from 20 to 100%)
-adjustable pre-cocking (6 levels)
-aUTO programmable fire modes (full auto, semi, 3-rd burst, 5-rd burst)
-sEMI programmable fire modes (semi, binary, AUG, sniper)
-easy programming via trigger
-low battery alarm
-compatible with brushless motors
**The AUTO function fires a 3 round burst first then fires Full Auto.
The replica is made mainly of nylon fibre-reinforced polymer and metal parts. The polymer used is characterised by high strength, rough texture and matt colour.
The most critical parts are made of metal , including: flame suppressor, external barrel, dummy slide, shell ejector flap, fire mode switch, breech release button, magazine clip, QD attachments on the butt, pins and reloading lever.
The Light Ops Stock is a minimalist stock with low weight and an impeccable and modernistic design. The model has rubber non-slip stickers on both sides of the cheek piece, and the characteristic curved rubber of the stock foot that settles comfortably on the shoulder.
In addition to the aforementioned internal parts ( TDC Magnus™ chamber, Æther™ gearbox shell, Helium™ flat rubber, sealed aluminium nozzle), inside the replica you will find, among others:
- 8mm plain bearings
- steel gears
- polycarbonate polymer piston with full steel slats
- high quality 6.03mm precision barrel
The replica uses the quick spring change system, ESA™. This allows the power of the replica to be quickly and efficiently adapted to the conditions expected on the field of play without the need for access to a workshop or a range of specialised tools.
Features of the replica:
- lightweight and compact design.
- hAL™ layout.
- light Ops Stock stock.
- Ergonomic pistol grip.
- m-LOK standard front sight
-eSA™ quick-change spring system
-Folding sighting instruments.
Package include:
- S-Mag Hi-Cap Magazine
- Cleaning rod
- Replica
- Allen key
- Small Tamyia - Deans adapter
- M90 additional spring
Package exclude:
- The set does not include the battery nor charger
NOTE!!!
When starting the replica for the first time, immediately after connecting the batteries, hold the trigger in SAFE mode for about 5 seconds to activate the HAL™ module
| Colour | Olive |
Battery included NiCd
rechargeable battery is characterized by high efficiency
current-carrying capacity, but there are disruptive effect on memory.
Should be unloaded and loaded in the full cycle, ie, it is recommended
to fully discharge, and after unloading must charge the battery
immediately without leaving it for a long time in a discharged state. | No |
| Bearings diameter [mm] | 8 |
| Blow Back Blow back is a simulation system of the cocking lever - it imitates the work of it as the equivalent sharp. This system raises the realism and adds a lot more experience during shooting. | No |
| Product length [cm] | 75 |
| Product weight [g] | 2130 |
| Power supply | Electric |
| Material | Aluminum Plastic |
| Muzzle velocity [FPS] It is the spped of bb, while its leaving the innerbarrel of replica. This speed is measured in FPS (Feet Per Second). 1 FPS = 0,3 m/s 1 J = 99 m/s 1 J = 326,7 FPS | 410 |
| Fire mode | Full-auto Adjusted burst Semi-auto |