Specna Arms SA-FX01 FLEX™ Gen.2GATE X-ASR airsoft Carbine
The SpecnaArms Flex Gen.2 series of carbines was created to provide the best possible user experience at an attractive price. Based on experience, passion, commitment, the series has been redesigned to achieve even better performance that will allow the user to take a factory product out of the box that is up to any task on the airsoft field.
To this end, the Flex Gen.2series has been equipped with, among other things:
- TDC Magnus™ Rotary Hop-Up Chamber (Top Down Center) allowing for very accurate and stable adjustment (covered by European Patent number 015052069-0001)
- Helium™ Flat Hop Eraser, which will improve the stability of the ball's undercurve
- Aluminium sealed nozzle
- Æther™ Gearbox - reinforced frame (covered by European Patent number: 015044865-0001), equipped with:
- mainspring release function
- pre-cocking and AoE inspection windows
- reinforced front
- inspection windows for easy priming
- trigger adjustment function
- screw holes for frame alignment
- Readiness for use with M140 springs
The carbine is equipped with a factory-fitted MOSFET X-ASR from the Polish GATE brand. This is an unprecedented collaboration between a Polish manufacturer and a well-known airsoft gun factory. The highest quality MOSFET X-ASR will take care of the safety of the replica's components, improve the response to the trigger and the life of the electronics and battery, as well as allow you to diagnose basic failures inside the replica thanks to the built-in indication LEDs.
The X-series is Specna Arms' answer to the very popular trend of AR-15-based submachine airsoft guns. Thanks to its compact size and robust performance, the replica is a very good choice for CQB games. In addition, the replica can prove itself as a backup for a sniper or an RKM operator. Moreover, the nylon fibre reinforcement makes the design more robust than other polymer constructions.
TheSA-FX01 is fitted with a frontal RIS rail , with the barrel terminating in a standard discharge device. Folding sighting instruments are mounted on the dorsal RIS rail.
Nylon fibre-reinforced polymer is used for the barrel, free-float front sight, slide with Light Ops type buttstock and pistol grip. Aluminium is used for the barrel, flame damper, enlarged reloading handle and manipulators. All screws, pins, the QD assembly and the dummy lock are made of steel, while the barrel is marked with the serial number.
The replica is fitted with a minimalist Light Ops stock. The Light Ops extendable buttstock has non-slip rubber panels on both sides acting as cheekpieces and a distinctive curved rubber buttstock that sits comfortably on the shoulder.
The replica uses the quick-change spring system, ESA™. This allows the power of the replica to be quickly and efficiently adapted to the conditions expected on the field of play without the need for access to a workshop or a range of specialised tools.
In addition to the already mentioned new internal parts, the replica features:
-8mm plain bearings
- Polycarbonate polymer piston with a full steelbarrel
- High-quality 6.03mm precision barrel
- The flame suppressor is mounted on a 14-millimetre left-hand thread.
- Fully compatible with LiPo and LiFe batteries
-ESA™ quick-change spring system requiring no specialist tools
- Lightweight polymer construction
- Ergonomic Light Ops Stock stock
- Front with M-LOK mounting system
Package include:
- S-Mag Hi-Cap Magazine
- Cleaning rod
- GATE X-ASR Diagnostics Card
- Replica
- Small Tamyia - Deans adapter
- M90 additional spring
Package exclude:
- The set does not include the battery nor charger
| Based on | M4 / AR15 / M16 |
| Colour | Black |
Battery included NiCd
rechargeable battery is characterized by high efficiency
current-carrying capacity, but there are disruptive effect on memory.
Should be unloaded and loaded in the full cycle, ie, it is recommended
to fully discharge, and after unloading must charge the battery
immediately without leaving it for a long time in a discharged state. | No |
| Blow Back Blow back is a simulation system of the cocking lever - it imitates the work of it as the equivalent sharp. This system raises the realism and adds a lot more experience during shooting. | No |
| Product length [cm] | 76 |
| Product weight [g] | 2000 |
| Power supply | Electric |
| Material | Aluminum Plastic |
| Made of | Steel |
| Muzzle velocity [FPS] It is the spped of bb, while its leaving the innerbarrel of replica. This speed is measured in FPS (Feet Per Second). 1 FPS = 0,3 m/s 1 J = 99 m/s 1 J = 326,7 FPS | 360 |
