Suppressed MK Pistol Replica - Black/Brown Grip
This time WE offers a true Soviet classic. MK is a replica of a known Makarov compact pistol for 9x18 mm ammunition. The replica was made with the highest care for details. It is a practically “full metal” construction, the only parts made of polymer are the grip linings. The quality of finish and how well all parts are aligned together can be experienced and felt from the very first moment the replica is held in hands. Materials used also make its weight close to that of the original.
Thanks to the ergonomic, profiled grip, the replica ideally sits in the User’s hand. The safety and the slide release button alike are located on the left side, under the thumb. The magazine release button, on the other hand, is located at the bottom of the grip. The trigger of the replica operates in double action mode.
The set includes a metal, dedicated silencer, which, more importantly, can conceal an internal barrel extension. Similarly to the silencer, the barrel extension is attached using a thread, which makes it better sealed and allows to increase the range and the muzzle velocity of the replica from ~220 FPS to even ~320 FPS! Even with the installed silencer, MK looks very stylish and remains comfortable to use.
Thanks to the use of a powerful Blow-Back system, it was also possible to bring the operation of the replica close to that of the original. The system sets the slide in motion, which is pulled back after each shot and when the magazine has been emptied it stays in the rear position. This causes the “kick” effect of the replica and largely increases the sensation and the pleasure drawn from firing the replica. In order to adjust the Hop-Up system, it is necessary to remove the slide of the replica, which lasts exactly several seconds - in order to do that, it is necessary to pull the trigger guard down.
The replica comes with a metal magazine that apart from a green gas container holds also up to 48 BBs.
The set includes:
- replica
- magazine
- User’s manual
- internal barrel extension
- silencer
Blow Back Blow back is a simulation system of the cocking lever - it imitates the work of it as the equivalent sharp. This system raises the realism and adds a lot more experience during shooting. | Yes |
| Product length [cm] | 27 |
| Product weight [g] | 630 |
| Power supply | Gas |
| Muzzle velocity [FPS] It is the spped of bb, while its leaving the innerbarrel of replica. This speed is measured in FPS (Feet Per Second). 1 FPS = 0,3 m/s 1 J = 99 m/s 1 J = 326,7 FPS | 320 |
| Fire mode | Semi-auto |
| Hop-Up Hop-Up system is used for overclocking bb during the shot (putting it in rotation), through which, it extends its flight path. Acting laws of physics make that bb lift up, while the gravitational force take it down. Appropriate adjustment of Hop-Up, will compensate for these two factors, which result in long and straight flight for longer distance and be greater focus shot (to improve accuracy). | Yes |
| Length minimal [mm] | 160 |
| Magazine capacity [pcs.] | 16 |
| Magazine type | low-cap |