Special
-15%
New in
- Wymiary: 35x12x7mm
- Współpracuje z: NiMh, LiPo
- Dostosowany do sprężyn max 210
- Okablowanie w zestawie
- Producent: JeffTron
Special
-10%
New in
- Wymiary: 35x12x7mm
- Współpracuje z: NiMh, LiPo
- Dostosowany do sprężyn max 210
- Okablowanie w zestawie
- Producent: JeffTron
Special
-5%
New in
- Układ mosfet w formie kostki stykowej V2
- Przeznaczenie: repliki z GB V2
- Współpracuje z: Ni-MH 8.4 - 12V, Li-Po 7.4 - 14.8V
- Dostosowany do sprężyn M160
- Okablowanie w zestawie
- Producent: JeffTron
Special
-10%
New in
- Dimensions:
- Compatible with: Ni-MH 8.4 - 12 V, Li-Po 7.4 - 14.8 V
- Adapted for M210 springs
- Manufacturer: Jefftron
Special
-10%
New in
- A MOSFET unit in the form of a V3 switch assembly
- Purpose: GB V3 Replica
- Compatible with: Ni-MH 8.4 - 12 V, Li-Po 7.4 - 14.8 V
- Adapted for M160 springs
- Manufacturer: Jefftron
Special
-10%
New in
- Dimensions: 25 x 12 x 7 mm
- Compatible with: Ni-MH 8.4 - 12 V, Li-Po 7.4 - 14.8 V
- Adapted for M210 springs
- Wiring included in the set
- Manufacturer: Jefftron
New in
Product unavailablePerun:
Perun V2 Optical Back Wired mosfet
- Przeznaczenie: repliki z GB V2
- Waga: 25g
- Producent: Perun
- Wersja z kablami na tył repliki
79,47 €
New in
Product unavailablePerun:
G&G ETU Upgrade kit
- Przeznaczenie: repliki G&G z układem ETU
- Waga: 25g
- Precocking i aktywny hamulec
- Tryb ochrony akumulatora
- Elektroniczny bezpiecznik
- Tryb podwójnego strzału
- Producent: Perun
48,07 €
New in
Perun:
Perun V3 Optical mosfet
- Przeznaczenie: repliki z GB V3
- Waga: 25g
- Producent: Perun
- Wersja z kablami na przód repliki
79,47 €
New in
Gate:
TITAN V2 NGRS (Full Set, Front-Wired)
- Front Wired Version
- Purpose: Tokyo Marui V2 Next Generation Recoil Shock
- The control system that replaces the trigger connector cube
- Weight: 200 g
- Manufacturer: Gate
167,81 €
New in
Gate:
TITAN™ V2 NGRS Controller Set (Full Set, rear wired)
- Wersja Rear Wired
- Przeznaczenie: Tokyo Marui V2 Next Generation Recoil Shock
- Układ sterujący zastępujący kostkę stykową spustu
- Waga: 200g
- Producent: Gate
167,81 €
New in
Jefftron:
MOSFET AB II Module Unit with Wiring
- Dimensions: 27 x 10 x 7 mm
- Compatible with: Ni-MH 8.4 - 12 V, Li-Po 7.4 - 14.8 V
- Adapted for M160 springs
- Wiring included in the set
- Manufacturer: Jefftron
23,94 €
New in
Product unavailableJefftron:
MOSFET Micro AB II Module Unit
- Dimensions: 27 x 10 x 7 mm
- Compatible with: Ni-MH 8.4 - 12 V, Li-Po 7.4 - 14.8 V
- Adapted for M160 springs
- Manufacturer: Jefftron
15,70 €
New in
Product unavailableJefftron:
MOSFET Module V3 with Wiring
- A MOSFET unit in the form of a V3 switch assembly
- Purpose: GB V3 Replica
- Compatible with: Ni-MH 8.4 - 12 V, Li-Po 7.4 - 14.8 V
- Adapted for M160 springs
- Wiring included in the set
- Manufacturer: Jefftron
30,82 €
New in
Jefftron:
MOSFET Module V2 with Stock Wiring
- A MOSFET unit in the form of a V2 switch assembly
- Purpose: GB V2 Replica
- Compatible with: Ni-MH 8.4 - 12 V, Li-Po 7.4 - 14.8 V
- Adapted for M160 springs
- Wiring included in the set
- Manufacturer: Jefftron
32,87 €
New in
Product unavailableJefftron:
MOSFET Module V2 with Wiring
- A MOSFET unit in the form of a V2 switch assembly
- Purpose: GB V2 Replica
- Compatible with: Ni-MH 8.4 - 12 V, Li-Po 7.4 - 14.8 V
- Adapted for M160 springs
- Wiring included in the set
- Manufacturer: Jefftron
28,80 €
New in
Jefftron:
MOSFET JeffTron Micro II Module with Wiring
- Dimensions: 15 x 7 x 5 mm
- Compatible with: NiMh, LiPo
- Adapted for M160 springs
- Wiring included in the set
- Manufacturer: Jefftron
17,86 €
New in
Product unavailableJefftron:
MOSFET II Module
- Dimensions: 25 x 12 x 7 mm
- Compatible with: Ni-MH 8.4 - 12 V, Li-Po 7.4 - 14.8 V
- Adapted for M210 springs
- Manufacturer: Jefftron
16,90 €
New in
Product unavailablePerun:
MOSFET Perun Unit
- Dimensions: 14 x 6 x 3 mm
- Compatible with: NiMh, LiPo
- Maximum Muzzle Velocity: 650 FPS using 0.2 g BBs
- Maximum Rate of fire: 50 BBs/S
- Manufacturer: PERUN
13,29 €
New in
Product unavailablePerun:
MOSFET Perun AB Unit
- Dimensions: 20 x 13 x 7 mm
- Compatible with: NiMh, LiPo
- Manufacturer: PERUN
23,91 €
Special
-15%
- Purpose: GB V2 Replica
- Adaptation: max M160 and ROF 25 BB / s
- Weight: 10 g
- Manufacturer: Jefftron
Special
-37%
- Advanced System Control Unit
- Reduces the wear of internal elements and improves replica’s parameters
- Material: Polymer
- Weight: 35 g
- Manufacturer: Airsoft Systems
Special
-29%
- Advanced System Control Unit
- Reduces the wear of internal elements and improves replica’s parameters
- Material: Polymer
- Weight: 35 g
- Manufacturer: Airsoft Systems
Special
-24%
- Tracer Illuminator, Mosfet, Chronograph, BB Counter, Li-Po Alarm
- Material: Polymer
- Weight: 295 g
- Colour: Tan
- Power Source:
- - AN/PEQ - 2xAA batteries
- - Tracer Suppressor - 4xAAA
- Thread: 14 mm Left-Handed
- Manufacturer: XCORTECH
Special
-24%
- Tracer Illuminator, Mosfet, Chronograph, BB Counter, Li-Po Alarm
- Material: Polymer
- Weight: 295 g
- Colour: Black
- Power Source:
- - AN/PEQ - 2xAA batteries
- - Tracer Suppressor - 4xAAA
- Thread: 14mm Left-Handed
- Manufacturer: XCORTECH
Special
-10%
- Purpose: GB V3 Replica
- Adaptation: max M160 and ROF 25bb / s
- Weight: 3g
- Manufacturer: Jefftron
- Purpose: TITAN Gate systems
- Weight: 30 g
- Manufacturer: GATE
32,61 €
- The control system that replaces the trigger connector cube
- Purpose: Gearbox V2
- Weight: 225 g
- Manufacturer: Gate
168,84 €
- Dimensions: 15 x 7 x 5 mm
- Compatible with: NiMh, LiPo
- Adapted for M160 springs
- Manufacturer: Jefftron
9,28 €
- The control system that replaces the trigger connector cube
- Purpose: Gearbox V3
- Weight: 200 g
- Manufacturer: Gate
180,92 €
- Przeznaczenie: wszystkie rodzaje gearboxów AEG
- Wymiary: 30x15mm
- Waga: 5g
- Producent: XCORTECH
11,84 €
- Length: 840 - 920 mm
- Weight: 2550 g
- Color: black
- Made of: an alloy of zinc and aluminum, steel and plastic
- Muzzle velocity: ~410 / ~310 FPS
- Version with the ASCU Gen.4 module
- Enter & Convert™ quick main spring exchange system
- Manufacturer: Specna Arms
279,95 €
- Programmer Included in the Set
- Measurements: 55 x 19 x 7 mm
- Weight: 8g
- Manufacturer: Gate
89,13 €
- Full Wiring Set
- Purpose: GB V3 Replica
- Adaptation: max M160 and ROF 25bb / s
- Weight: 48g
- Manufacturer: Jefftron
66,42 €
- Purpose: replicas with GB V2
- Adjustment: max M160 and ROF 25bb/s
- Weight: 10g
- Manufacturer: Jefftron
53,26 €
- Dimensions : 4x6x21mm
- Fits : AEG replicas
- The set includes:
- - Mosfet
- - wires
- - 3 x heat shrink tube
- Manufacturer : Gate
14,25 €
- Measurements: 19 x 7 x 50 mm
- Purpose: AEG Replicas
- The set includes:
- - Mosfet unit
- - wires
- - set of connectors
- Manufacturer: Gate
40,82 €
- Measurements: 30 x 10 x 5 mm
- Purpose: AEG Replicas
- Manufacturer: Gate
35,99 €
- Dimensions: 29x10x6mm
- Cooperates with: NiMh, LiPo
- Adapted for the M130 main springs
- The set includes a set of wiring.
- Manufacturer: JeffTron
21,88 €
- Dimensions : 19x7x42mm
- Fits : AEG replicas
- The set includes:
- - Mosfet
- - Additional kit of Deans-T Connectors
- - Single signal wire for trigger contacts
- - Double signal wire for trigger contacts
- Manufacturer : Gate
24,64 €
- Dimensions : 19x7x42mm
- Fits : AEG replicas
- The set includes:
- - Mosfet
- - Additional kit of Deans-T Connectors
- - Single signal wire for trigger contacts
- - Double signal wire for trigger contacts
- Manufacturer : Gate
33,57 €
- Dimensions : 70x19x10mm
- Designed for: the AEG replicas
- The set includes:
- - the MOSFET unit,
- - wiring,
- - 4 x thermo-shrinkable insulation,
- - set of T-Connect plugs,
- - programming button,
- Manufacturer : Gate
52,90 €