CZ Scorpion EVO 3 A1 Submachine Gun Replica
CZ Scorpion EVO 3 A1 is a phenomenon on the airsoft market - the first replica to be entirely designed and manufactured in Europe, by a Danish company - Action Sport Games DK. Thanks to a license granted by Česká zbrojovka a.s., the manufacturer of the live firearm original, we can feast our eyes with original markings and naming. The replica was reproduced in detail in 1:1 scale - both the measurements and the weight were brought as close as possible to that of the original.
The replica was made of materials very similar to those used in the original. The receiver with the stock and handguard were made of a durable polymer, reinforced with fiberglass. The internal barrel was made of a single piece of aluminum using precise CNC machines, just like the flash hider and barrel nut. The aforementioned markings, identical to those of the original, are pleasant to the eye - CZ logo, caliber designation, manufacturer, serial number. Every detail has been taken care of.
The replica is equipped with a long, top RIS rail and 3 universal RIS 22mm mounting rails on the handguard. Thanks to them, it is possible to attach a wide array of additional accessories to the replica. The safety/fire mode selector is double-sided, while the charging handle can be easily put from one side to the other in a manner of seconds, which makes the replica comfortable and easy to use also by left-handed users. The stock features an anti-slip stock pad and can be put to the side of the receiver. It also features 3 settings of length adjustment. In order to gain access to the Hop-Up chamber, it is necessary to pull back the charging handle and lock it in the rear position. A noteworthy detail is an operational bolt-catch mechanism.
HPA Edition is equipped with an HPA Inferno Gen.2 motor made by an American company - Wolverine, designed especially for the needs of Scorpion EVO. It allows adjusting the rate of fire of a replica in a range of 15 - 30 BBs per second. It is also possible to program a burst mode, by specifying the number of BBs - from 2 to 7 - in a series.
HPA version, similarly to an AEG replica, features a realistic system that stops the replica’s operation after the last BB has been fired - in order to continue firing, it is necessary to insert a full magazine and release the bolt-catch mechanism.
Furthermore, the replica features a precision internal barrel with a diameter of 6.03 mm.
The set includes a polymer Low-Cap with a capacity of up to 75 BBs.
ATTENTION! The set does not include an HPA regulator or tank that are necessary for operation.
The set includes:
Blow back is a simulation system of the cocking lever - it imitates the work of it as the equivalent sharp. This system raises the realism and adds a lot more experience during shooting.
|Product length [cm]|
|Product weight [g]|
|Muzzle velocity [FPS]|
It is the spped of bb, while its leaving the innerbarrel of replica. This speed is measured in FPS (Feet Per Second).
1 FPS = 0,3 m/s
1 J = 99 m/s
1 J = 326,7 FPS
Hop-Up system is used for overclocking bb during the shot (putting it in rotation), through which, it extends its flight path. Acting laws of physics make that bb lift up, while the gravitational force take it down. Appropriate adjustment of Hop-Up, will compensate for these two factors, which result in long and straight flight for longer distance and be greater focus shot (to improve accuracy).
|Inner barrel length [mm].|
|Length minimal [mm]|
|Magazine capacity [pcs.]|
|Type of thread on the barrel|