Replica SA-G12V EBB carbine (OUTLET)
- Cleaning rod
- Hi-Cap Magazine
- The set does not include the battery nor charger
Well-known on the airsoft market brand Specna Arms presents Series SA-G!Replicas SA-G with their level of workmanship can confidently compete with replicas of top manufacturers.
The replica, just like the original, is made of very durable polymer, metal, and in the most critical areas steel (so all screws, pins and the tactical suspension mount are steel). The replica is equipped with a front with RIS rails housing the battery.
The replica is characterised by very good fit, it is made of an eye-pleasing matt polymer. Important components are connected by pins, in this way we can change individual components components such as the magazine socket. Made of robust polymer the body of the replica has a individual serial number, manufacturer's markings and aesthetic fire selector markings. The replica has a side-folding adjustable buttstock, which facilitates transport and The replica has a side-folding, adjustable buttstock, which facilitates transport as well as operation in cramped quarters of buildings. The metal barrel The replica's metal barrel is finished with a flame suppressor mounted on a 14mm CW thread.
The heart of the replica is a reinforced gearbox V3 LiPo Ready, construction. is fully modifiable and compatible with standard parts, The replica can therefore be tuned at will. Instead of the classic contact block, the replica uses a microstick - this release improves the response mechanism on trigger presses, eliminates the possibility of contact burnout and increases firing rate.
The replica has been fully adapted for use with batteries of the types LiPo and LiFe. With a base initial discharge velocity of the order of ~380 FPS guaranteed by the by the factory-installed mainspring, the replica is ideal for for medium range operations.
The replica uses the Enter & Convert™ quick-change spring system. To access the Gearbox, simply knock out the pin located at the To access the Gearbox, simply knock out the pin located at the flask latch, then pull out the flask locking piece. You gain Then you have access to the mainspring guide, which you can quickly and easily pull out through the rear wall of the gearbox. pull it out through the rear wall of the gearbox. This allows for quick and efficient adjustment of the replica's power to the conditions expected on the battlefield without having access to a workshop or a number specialist tools. The entire spring change takes 45 seconds and requires only one screwdriver.
Replica, as the original, is designed to be operated by both right- and left-handed thanks to the double-sided fire selector.
The replica uses an interesting solution in the form of system EBB (Electric Blow Back), This system moves the slide, increasing the realism bringing it closer to the combustible counterpart. This system can be easily deactivated by unscrewing the special guide that connects the piston to the dummy slide.
A Hi-Cap magazine with a capacity of 350 rounds is added to the kit.
Each replica undergoes, still at the factory, a zero inspection confirmed by a special certificate with a hologram and an individual serial number assigned to each replica.
rechargeable battery is characterized by high efficiency
current-carrying capacity, but there are disruptive effect on memory.
Should be unloaded and loaded in the full cycle, ie, it is recommended
to fully discharge, and after unloading must charge the battery
immediately without leaving it for a long time in a discharged state.
Blow back is a simulation system of the cocking lever - it imitates the work of it as the equivalent sharp. This system raises the realism and adds a lot more experience during shooting.
|Product length [cm]|
|Product weight [g]|
|Drive / power supply|
|Muzzle velocity [FPS]|
It is the spped of bb, while its leaving the innerbarrel of replica. This speed is measured in FPS (Feet Per Second).
1 FPS = 0,3 m/s
1 J = 99 m/s
1 J = 326,7 FPS
Indications v2, v3, v6 does not mean the level of advance, but only shape of gearbox skeleton which was used and selected by the manufacturer depending on the capabilities of the body of the replica. For example, a models of the M4/M16 family, MP5, have a v2 gearbox, while the AK family have gearbox v3.
Hop-Up system is used for overclocking bb during the shot (putting it in rotation), through which, it extends its flight path. Acting laws of physics make that bb lift up, while the gravitational force take it down. Appropriate adjustment of Hop-Up, will compensate for these two factors, which result in long and straight flight for longer distance and be greater focus shot (to improve accuracy).
|Inner barrel length [mm].|
|Length minimal [mm]|
|Magazine capacity [pcs.]|
G Series EDGE™
|Quick Spring Change system|
|Type of plug|
|Type of thread on the barrel|