RK 104 carbine replica
The RK 104 carbine replica is made of steel and plastic. Only the pistol grip and the fixed stock were made of plastic and the total length of the replica s 860mm.
The firing mode selector lever is located on the left side of the replica just like in the real firearm. The replica is equipped with the PBB system which perfectly imitates the operation of the real firearm. It makes the bolt carrier's dummy move and gives a perceptible "kick" effect.
After pulling the cocking handle, the dust cover opens and the bolt carrier's dummy moves backwards. This allows to adjust the hop-up systems.
The replica is made in black color. It is perfect to operate on short and middle distances.
The carbine uses the extraordinary BlowBack system which adds additional realism when using the replica and provides the user additional feelings.
The Pneumatic Blow-Back system operates on the principal of taking a part of the compressed air from the gearbox to a special cylinder that is located above the gearbox’s casing. The small piston that is located in the Pneumatic Blow-Back system moves a thin plate that is attached to it. The plate imitates the bolt carrier.
The G&G replica’s that are equipped with the Pneumatic Blow-Back system have got a reinforced and modified V.3 gearbox. The modification that was made was the adaptation of the gearbox to the Pneumatic Blow-Back system and adding the “active main spring release” button in the form of the actuator.
The set includes:
- the replica,
- a magazine
rechargeable battery is characterized by high efficiency
current-carrying capacity, but there are disruptive effect on memory.
Should be unloaded and loaded in the full cycle, ie, it is recommended
to fully discharge, and after unloading must charge the battery
immediately without leaving it for a long time in a discharged state.
Blow back is a simulation system of the cocking lever - it imitates the work of it as the equivalent sharp. This system raises the realism and adds a lot more experience during shooting.
|Product length [cm]|
|Product weight [g]|
|Muzzle velocity [FPS]|
It is the spped of bb, while its leaving the innerbarrel of replica. This speed is measured in FPS (Feet Per Second).
1 FPS = 0,3 m/s
1 J = 99 m/s
1 J = 326,7 FPS
Indications v2, v3, v6 does not mean the level of advance, but only shape of gearbox skeleton which was used and selected by the manufacturer depending on the capabilities of the body of the replica. For example, a models of the M4/M16 family, MP5, have a v2 gearbox, while the AK family have gearbox v3.