!DROP ZONE! Attention this is not a drill! The landing of the best deals has begun!

GR16 DST Blowback EBB carbine replica - tan

  • PBB System (Pneumatic Blow-Back)
  • Length: 780-880 mm
  • Weight: 2275g
  • Material: Polymer + Metal
  • Engine: Electric
  • Muzzle Velocity: ~400 FPS
  • Manufacturer: G&G

Click to zoom

GR16 DST Blowback EBB carbine replica - tan
Manufacturer: G&G
Product code: GIG-01-004124
Very small quantity of stock
Ready to ship in 3days
Cost from 2,39 €
180,92 €
180.92 / 1pcs
2247 pts
74.90 pts

GR16 DST Blowback EBB carbine replica

The replica was made in such a way so as to make it as light as possible - which as a result makes it very comfortable in use. Near the magazine well is the manufacturer’s logo and the replica itself features an individual serial number. The stock, receiver and the handguard were made from a polymer.

GR16 DST Blowback EBB Assault Rifle Replica - Tan is a field-approved, combat-ready replica - some technical and practical information below.

The replica has a classic, 6-position, telescopic stock. Due to adjustable length it can be adapted to the body type and user preferences. Access to the hop-up chamber is gained in a traditional way after pulling back the charging handle. After the removal of the top transport handle, various types of optical sights can be attached in its place on a 22mm, RIS mounting rail.

The rifle replica features a PBB system - Pneumatic Blow Back, it is, simply put, a bolt recoil system, that brings the operation of the replica closer to that of the live firearm original and thus enhancing the experience. It operates by diverting some of the compressed air from the gearbox to a special cylinder located underneath the skeleton. The effect is most noticeable when BBs are loaded. The piston located in the PBB cylinder moves the attached to it thin plate that imitates the bolt. 

WARNING: The manufacturer does not recommend usage of batteries more powerful than 8,4V due to the possibility of damaging the aforementioned plate.

G&G replicas with PBB system have a reinforced, modified gearbox V2. The skeleton of the gearbox is made of aluminum.

The replica comes with a metal, hi-cap magazine with a capacity of up to 300 BBs.

The set does not include a battery or a charger.

The set includes:

- replica
- magazine
- cleaning rod
- manual
- package of 1000 G&G 0,20 BBs


Tech specs:
Replika karabinka GR16 DST Blowback EBB
12 months
Velocity [FPS]:

It is the spped of bb, while its leaving the innerbarrel of replica. This speed is measured in FPS (Feet Per Second).

1 FPS = 0,3 m/s

1 J = 99 m/s

1 J = 326,7 FPS

Propulsion / Powered by:
Gearbox version:

Indications v2, v3, v6 does not mean the level of advance, but only shape of gearbox skeleton which was used and selected by the manufacturer depending on the capabilities of the body of the replica. For example, a models of the M4/M16 family, MP5, have a v2 gearbox, while the AK family have gearbox v3.

v2 Gearbox
Type of fire:
Single, auto
Made of:
Metal + plastic
Lenght [mm]:

The length of the replca is measured between the two most distant points of each other. Different models have several of these values, because of its design allows to increase or decrease it length (eg.  folding stock or extended flash hider).

Inner barrel length [mm]:
Weight [g]:

This is a value that includes the weight of the replica, magazine and other accessories that are include in set without a battery, charger, cleaning rod, etc., etc.

Battery included:

NiCd rechargeable battery is characterized by high efficiency current-carrying capacity, but there are disruptive effect on memory. Should be unloaded and loaded in the full cycle, ie, it is recommended to fully discharge, and after unloading must charge the battery immediately without leaving it for a long time in a discharged state.
NiMH batteries have a higher self-discharge over time and shorten the life - on the other hand, they earn about 30% more capacity.

Magazine type:
Hi-Cap magazine
Magazine capacity [pcs]:

Hop-Up system is used for overclocking bb during the shot (putting it in rotation), through which, it extends its flight path. Acting laws of physics make that bb lift up, while the gravitational force take it down. Appropriate adjustment of Hop-Up, will compensate for these two factors, which result in long and straight flight for longer distance and be greater focus shot (to improve accuracy).

Blow Back:

Blow back is a simulation system of the cocking lever - it imitates the work of it as the equivalent sharp. This system raises the realism and adds a lot more experience during shooting.

Users reviews
Ask for this product:

If this description is not sufficient, please send us a question to this product. We will reply as soon as possible.

Your e-mail:
This field is required for placing an order.
This field is required for placing an order.
fields marked with - This field is required for placing an order. - are required
Recommend this product:

If you want to tell your friend about this product, please use the form below.

This field is required for placing an order.
You can add more e-mail addresses by separating them with a coma
This field is required for placing an order.
This field is required for placing an order.
fields marked with - This field is required for placing an order. - are required
This page uses cookie files to provide its services in accordance to Cookies Usage Policy. You can determine conditions of storing or access to cookie files in your web browser.